Black Box AVS-HDB-4TX, Руководство пользователя

Страница: 13 / 28

Page 13 724-746-5500 | blackbox.com
Chapter 2: Overview
Table 2-2. Back panel components.
Number
in Figure
2-2 Component Description
4 ID PRESET • Assign ID for AVS-HDB-4TX to identify every unit. The
value can range from 0–F.
• After you assign the ID, restart the AVS-HDB-4TX for
stable performance.
5 RS-232 IN: Connect with a control device through a 3-pin captive
cable.
LOOP: Cascade the RS-232 control signal to another trans-
mitter by connecting to its RS-232 IN port.
NOTE: Be sure to set the communication protocol parame-
ters correctly, and send RS-232 commands as described in
Section 4.2.3, RS-232 Communication Commands.
6 EDID DIP
switches 4-pin EDID DIP switches: “1” stands for ON, ”0” stands for
OFF. Set the switches to change EDID data as described in
Section 4.3, EDID Management.
7 24-VDC
power sock-
et Plug the included 24-VDC power adapter into this socket
and tighten the screw.