8
VOICE CONFERENCING SYSTEM
CHAPTER 3: Installation
CAUTION!
When you install or modify telephone wiring, always follow basic safety
precautions to reduce the risk of fire, electrical shock, and injury. These
precautions should include the following:
• Never install telephone wiring during a lightning storm.
• Never install a telephone jack in a wet location unless the jack is
specifically designed for this.
• Never touch uninsulated telephone wires or terminals unless the
line has been disconnected at the network interface.
To install the Voice Conferencing System, take these steps:
1. Place the VCS’s main module on a conference table or desk.
2. Plug one end of the 8-conductor cable (the cable with the larger RJ-45
connectors) into the open socket on the bottom of the VCS’s main
module. Plug the other end into the larger socket (labeled “TO BASE
UNIT”) on the bottom of the power-interface module. Refer to the
illustration below.
3. Installation
