Models AC600A, AC601A, AC602A
6
Figure 1 – AC600A Front
Figure 2 – AC600 Rear
2. Installation
1. Connect the VGA IN of the AC600A or AC601A to the
computer's video port using the supplied cable
2. If desired, connect a local display to the VGA out port of the
Transmitter unit.
3. Using Category 5 cables connect the RJ45 ports of the Transmitter
to the Model AC602A Receiver.
4. Connect the Remote displays to the VGA output port of the
AC602 Receivers.
5. Plug in the supplied Power supply to the Power Input jack of the
Transmitter unit.
6. Turn on the local and remote displays, then the PC
Figure 3 – Setup Block Diagram