Black Box AC555A-4-R2, Руководство пользователя

Страница: 14 / 20

3. Installation
You’ll need one local and one remote unit (AC555A
-R2
includes both, or order
AC555A-4
-R2
and AC555A-REM
-R2
separately), a VGA source such as a monitor (not
included), Category 5, 5e, or 6 cable (not included), and power supplies (one for
each unit, included). Follow the steps listed on the next page and refer to Figures
2-1, 2-2, and 3-1 as you install the extenders.
The AC556A
-R2
accepts one stereo signal (the left and right channels) input on an
audio jack (similar to a computer). The stereo signal is broadcast to the two local
audio outputs and is “mixed” together to form a mono signal before transmitting
to a remote unit via CAT5, 5e, or 6 cable. Therefore, the left channel and the right
channel audio signals at a remote unit are the same.
After all connections are secure, you may plug the power adapters into the local
and remote units’ power receptacles; then plug the power adapters into AC outlets.
CHAPTER 3: Installation
12