2x1 Compact VGA Switch w/ Audio
5
2. Installation
2.1 Required Cables
The video input cables are generally HD15 (VGA) male to male
(customer furnished). The Audio inputs are 3.5 mm mini-stereo (also
customer furnished). If you are going to connect the unit to a Serial
port (such as PC’s COM) you would need a Male/Female DB9 Serial
Cable.
2.2 Inputs & Outputs
The AC505A-2A has 2 video and audio inputs: PC 1 Input and PC 2
Input. The unit has 1 video and audio output: SW Output. There is a
local video and audio output, which is a loop-out for PC 1 Input: Local.
2.3 Connecting the AC505A-2A
Connect your video and audio sources such as computer or notebook
PC to PC 1 Input and PC 2 Input. If the loop-out for input #1 is
desired, it can be connected to local video and audio.
Connect the display device such as a monitor (or a video projector) to
the switched video and audio outputs (SW Output).
Connect the included power supply to the AC505A-2A.
Select the desired mode of operation including the priority for your
video and audio output using the front panel switched buttons. If
preferred, the selection can also be done through RS-232 serial
commands by connecting a DB9 RS-232 Serial cable to your PC and
the AC505A-2A.
