11
CHAPTER 3: Installation
Now you can work on any software
and you will see it displayed on the
TV and your VGA monitor
simultaneously.
3.3 Hotkey Control
You can use the hotkeys as
outlined below to enhance the
quality of the image for the best
resolution for your system
configuration.
1. CTRL + ALT + E: To change
the size of the display. Use only
with Multi-system TV.
2. CTRL + ALT + F: Toggle Text
Fonts
a. 9 x 16 dot character size
b. 8 x 8 dot character size
3. CTRL + ALT + T:
Cycle through 4 different TV
display modes.
a. Flicker reduction without
horizontal overscan
b. Flicker reduction with
horizontal overscan
c. Normal without horizontal
overscan
d. Normal with horizontal overscan
Select the display mode that offers
the best results for your system
configuration and software
application.
3.4 Screen Movement
Flicfree software can adjust the
position of the screen display on the
TV. Because of the limitations of TV
technology, the NTSC system can
only display 460-470 horizontal lines.
The TV cannot display the full 480-
line output of VGA. For this reason,
you may notice overscan while
running some software applications.
Flicfree software drivers include the
following hotkeys that allow you to
position your presentation the way
you want it on the TV.
1. SCROLL UP:
[CTRL]+[ALT]+[I]
Use this control to move the TV
display area up.
2. SCROLL DOWN:
[CTRL]+[ALT]+[M]
Use this control to move the TV
display area down.
3. SCROLL LEFT:
[CTRL]+[ALT]+[K]
Use this control to move the TV
display area left.
4. SCROLL LEFT:
[CTRL]+[ALT]+[J]
Use this control to move the TV
display area right.
