Page 17
724-746-5500 | blackbox.com
AC300A-RX-R2
Chapter 4: Operation
4. Operation
4.1 Indicator LEDs
The system has integral indicator LEDs that are used to monitor the state of the
units. Transmitter and receiver units each feature one Video LED, one Audio LED
and one Power LED, shown in Figure 4-1. Table 4-1 explains each LED’s functions.
POWER LED
Power
LED
Video A, B,
and C LEDs
Audio
LED
Figure 4-1. LEDs on the transmitter and receiver.
Table 4-1. LEDs and their functions.
Transmitter and Receiver
LED
Color/State
Description
Power
Green/ON
Indicates that correct power has been applied.
Video A
OFF
Indicates no video detected on the input
Y-Video BNC connector.
ON
Indicates video detected on the input Y-Video
BNC connector.
Video B
OFF
Indicates that no video is present.
ON
Indicates that video is present.
Video C
OFF
Indicates that no video is present.
ON
Indicates that video is present.
Audio
OFF
No audio detected on input audio connector.
BLINKING
Audio detected on input audio connector.
