
Multi-format HD Video Scaler
17
3.3 Infra-Red Remote control (IR Remote)
Power:
Press the button once to power on
the AC139A. Press again to enter standby
mode.
Input:
Press the button repeatedly to toggle
through the various input sources
HD:
Press the button to select the
component input.
PC:
Press the button to select the VGA
input.
HDMI/DVI:
Press the button to select the
DVI input.
VGA through 1080p:
Press any one of the
buttons to directly select the desired output
resolution. For other output resolutions that
are not covered by these buttons please enter
Menu/Output OSD page to select them.
MENU:
Press the button to bring up the
OSD main menu page.
Exit:
Press the button to exit from a sub
menu or the main menu.
Up/Down/Left/Right:
Press the
▲
or
▼
buttons to move the highlight
bar to your desired parameter during the OSD operation. Press the
or
buttons to increase or decrease the setting value of a selected
parameter.
OK (Enter):
Press the button to confirm your selection.
Reset:
Press the button to reset the unit to the factory default values.
Auto Adjust:
Press the button to optimize the position of the picture
(picture centering) on the screen.
Содержание AC139A
Страница 23: ......