Black Box AC1003A-R2 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 24

Black Box AC1003A-R2 Скачать руководство пользователя страница 11

724-746-5500 | blackbox.com

724-746-5500 | blackbox.com

Page 11

Chapter 3: Installation

3. Installation

CAT5/5e/6 cabling for the CAT5 Multi VGA and Analog Audio Transmitter must be pinned to the TIA-EIA T568B wiring
specification.

Figure 3-1. T568B CAT5 Specification.

CAUTION: We also highly recommend that all CAT5 cables be preterminated and tested. Cables terminated on-site or in an

existing infrastructure should be tested before use to ensure compliance with the TIA-EIA T568B specification. Using
incorrectly terminated CAT5 cables can damage the transmitter.

CAUTION: This equipment is not intended for, nor does it support, distribution through an Ethernet network. Do not connect

these devices to any sort of networking or telecommunications equipment.

NOTE: Do not connect DC power until instructed to do so.

3.1 Prerequisites

Depending on the specific installation requirements, some common tools (screwdrivers, nutdrivers) and related hardware (mount-
ing screws) may be required. These are not included with the transmitter.

You might need the following items. For details, contact Black Box Technical Support at 724-746-5500 or [email protected].

• Appropriate audio cabling.

• Appropriate video cables and adapters (if needed).

• Auxiliary signal cables.

Of course, you will need appropriate CAT5 cable, as previously described, to connect the transmitter to receivers.

3.2 Installation Procedure

NOTE: All units must be configured alike for all supported features to function correctly. For example, a serial transmitter must be

connected to a CAT5 Multi VGA and Analog Audio serial type receiver for the serial interface to function properly. You
cannot mix one version of a transmitter with a different version of a receiver.

«
...
9
10
11
12
13
...
»

Содержание AC1003A-R2

























Отзывы:

Нет отзывов