
8
2-CHANNEL VGA BOOSTER
3. Installation
3.1 The Installation Procedure
Follow these steps to install your 2-Channel VGA Booster.
1. Place the Booster within 6 ft. (1.8 m) of the computer.
2. Connect the 6-ft. VGA input cable (included) from the VGA output
of the computer to the connector marked “VGA.”
3. Connect the VGA compatible monitor(s) to the connector(s) marked
“Output” on the rear of the Booster. You may use monitor extension
cables to extend the distance up to 700 feet (213.4 m) as shown in
Table 3-1.
4. Plug the 9-VDC wall power transformer (included) into the jack on the
rear of the Booster.
5. Plug the power transformer into an AC wall outlet. When the unit is
properly powered, the front-panel LED will glow red.
6. Turn on the computer and the monitor(s). The monitor(s) will display
the computer’s output.
7. Use the front-panel knobs to adjust the gain and peaking of the Booster’s
amplifiers to compensate for the long extension cable. The knobs have 6
positions from SHORT to LONG and correspond to cable lengths for
standard VGA (up to 480 lines), or Super VGA (up to 768 lines), as shown
in Table 3-1.