Black Box 2-Port ServSwitch KV7002A, Руководство пользователя

Страница: 18 / 19

15
Table 4-1. Hotkey commands.
Command Description
<Left-Ctrl><Left-Ctrl>
X
Switch to PC “X”.
<Left-Ctrl><Left-Ctrl> <up arrow> Switch to previous active PC.
<Left-Ctrl><Left-Ctrl> <down arrow> Switch to next active PC.
<Left-Ctrl><Left-Ctrl>
0
Begin AutoScan.
Any key Stop AutoScan.
<Left-Ctrl><Left-Ctrl>
S
Enable/disable “beep” sound.
X
= 1, 2, 3, 4
NOTE
After switching ports, there is a delay of up to 2 seconds before the
video displays. This is normal and is due to the video signal’s refresh
rate.
NOTE
A
UTO
S
CAN
The AutoScan feature allows you to monitor the activity of the connected
computers at regular ten-second intervals so that you can monitor the computer
activity without having to press the front-panel pushbuttons. This time interval
cannot be changed.
To invoke AutoScan, press <Left-Ctrl><Left-Ctrl>
0
.
NOTES
The interval between these two keys should be no more than a half
second. Once the scanning begins, it continues until you press any key
to exit AutoScan.
A flashing port LED indicates that the connected computer is running
AutoScan.
CHAPTER 4: Operation