Black & Decker TR250JA, Инструкция по эксплуатации

Страница: 5 / 28

Features
1. Filter
2. Cord Clip
3. Lid
4. On / Off Switch
5. Handle
6. Water Gauge
7. Neon Light
8. 2 Cups
9. Base Cover
Use
• Remove the 2 cups (8) from the kettle.
• Fill the kettle through the spout or lid
(3). The water level must be between
"Max" and "Min" ( Max = 0.5L / Min =
0.2L).
• Check the lid (3) is closed.
• Plug in and switch on. The neon ligt will
come on.
• The kettle will boil and switch off
automatically. To re-boil, wait a few
seconds, the switch needs time to reset.
Warning! If you experience
problems with your kettle
switching on and off during use
or switching off before boiling, check that
the flat element is free from scale (See
'Descaling').
• Always unplug the kettle after use.
• Take care when using the cups and do
not overfill above the inner rim (approx
200mls.)
• The kettle is fitted with a scale filter to
hold back limescale particles.
• If you switch the kettle on with too little
water, the kettle will cut out
automatically. Switch off and let the unit
cool down before re-filling. When it has
cooled down the switch will reset itself.
Approximate Boiling times
Approximately 6 minutes for 500mls
(Maximum)
Cleaning and maintenance
Warning! Before cleaning and maintenance,
switch the appliance off and remove the
plug from the socket.
• Allow the unit to cool down.
• Wipe with a damp cloth, then dry.
• Do not use abrasives as they will scratch
the plastic surface.
• Wrap the cord around the kettle and
secure using the cord clip (2).
• The cups can be placed inside the kettle
for compact storage.
The Scale Filter
Note: Even though your kettle comes with a
scale filter, you still need to clean the inside
(and the filter) regularly.
• Open the lid.
• Gently lift out the scale filter.
• Either rinse under the tap or use a soft
brush. Or when descaling your kettle,
drop the filter in too. Rinse thoroughly.
• To re-fit the scale filter, slide it in until it
rests on the notch under the spout.
5
ENGLISH