background image

8

ENGLISH

(Original instructions)

9

ENGLISH

(Original instructions)

u

 

Do not use the appliance if the cords 

are damaged or worn.

u

 

Wear stout shoes or boots to protect 

your feet.

u

 

Wear long trousers to protect your 

legs.

u

 

Before using the appliance, check that 

your cutting path is free from sticks, 

stones, wire and any other obstacles.

u

 

Only use the appliance in the upright 

position, with the cutting line near the 

ground. Never switch the appliance on 

in any other position.

u

 

Move slowly when using the appliance. 

Be aware that

 

freshly cut grass is 

damp and slippery.

u

 

Do not work on steep slopes. Work 

across the face of slopes, not up and 

down.

u

 

Never cross gravel paths or roads 

while the appliance is running.

u

 

Never touch the cutting line while the 

appliance is running.

u

 

Do not put the appliance down until the 

cutting line

 

has come to a complete 

standstill.

u

 

Use only the appropriate type of cut

-

ting line. Never use metal cutting line 

or fishing line.

u

 

Be careful not to touch the line trim

-

ming blade.

u

 

Keep hands and feet away from the 

cutting line at all times, especially 

when switching on the motor.

u

 

Before using the appliance and after 

any impact, check for signs of wear or 

damage and repair as necessary.

u

 

Never operate the appliance with 

damaged guards or without guards in 

place.

u

 

Take care against injury from any 

device fitted for trimming the filament 

line length. 

 

After extending new cutter line always 

return the machine to its normal oper

-

ating position before switching on.

u

 

Always ensure that the ventilation slots 

are kept clear of debris.

u

 

Do not use the lawn trimmer (edge 

trimmer), if the cords are damaged or 

worn.

Additional safety instructions for 

batteries and chargers
Batteries

u

 

Never attempt to open for any reason.

u

 

Do not expose the battery to water.

u

 

Do not store in locations where the 

temperature may exceed 40 °C.

u

 

Charge only at ambient temperatures 

between 10 °C and 40 °C.

u

 

Charge only using the charger pro

-

vided with the tool.

u

 

When disposing of batteries, follow 

the instructions given in the section 

"Protecting the environment".

Chargers

u

 

Use your BLACK+DECKER charger 

only to charge the battery in the tool 

with which it was supplied. Other bat

-

teries could burst, causing personal 

injury and damage.

u

 

Never attempt to charge non-recharge

-

able batteries.

u

 

Have defective cords replaced immedi

-

ately.

u

 

Do not expose the charger to water.

u

 

Do not open the charger.

u

 

Do not probe the charger.

$

The charger is intended for 

indoor use only.

Содержание STC1820P

















Отзывы: