background image

6

ENGLISH

(Original instructions)

Intended use

Your BLACK+DECKER ST1823 trimmer has been 

designed for trimming and finishing lawn edges and to cut 

grass in confined spaces. This appliance is intended for 

consumer use only.

Safety instructions

Warning! 

When using mains-powered 

appliances, basic safety precautions, 

including the following, should always be 

followed to reduce the risk of fire, electric 

shock, personal injury and material damage.

Warning!

 When using the machine the 

safety rules must be followed. For your 

own safety and bystanders please read 

these instructions before operating the 

machine. Please keep the instructions 

safe for later use.

Read all of this manual carefully before 

operating the appliance.

The intended use is described in this 

manual. The use of any accessory 

or attachment or the performance 

of any operation with this appliance 

other than those recommended in this 

instruction manual may present a risk 

of personal injury.

Retain this manual for future 

reference.

Using your appliance

Always take care when using the 

appliance.

Always use safety glasses or goggles.

Never allow children, persons with 

reduced physical, sensory or mental 

capabilities or lack of experience and 

knowledge or people unfamiliar with 

these instructions to use the machine, 

local regulations may restrict the age 

of the operator.

Never operate the machine while 

people, especially children, or pets are 

nearby.

Do not allow children or animals to 

come near the work area or to touch 

the appliance.

Close supervision is necessary when 

the appliance is used near children.

This appliance is not intended for use 

by young or infirm persons without 

supervision.

This appliance is not to be used as a toy.

Only use the appliance in daylight or 

good artificial light.

Use in a dry location only. Do not allow 

the appliance to become wet.

Avoid using the appliance in bad 

weather conditions, especially when 

there is a risk of lightning.

Do not immerse the appliance in water.

Do not open the body casing. There 

are not user-serviceable parts inside.

Do not operate the appliance in 

explosive atmospheres, such as in the 

presence of flammable liquids, gases 

or dust.

The appliance is only to be used with 

the power supply unit provided with the 

appliance.

Residual risks.

Additional residual risks may arise when 

using the tool which may not be included 

in the enclosed safety warnings. 

These risks can arise from misuse, 

prolonged use etc. 

Even with the application of the 

relevant safety regulations and the 

implementation of safety devices, certain 

residual risks can not be avoided.  

These include:

Содержание ST1823
















Отзывы: