background image

JXG6205SS 
Owner’s Manual

 

 

 

 

 

 

 

 

 

 

Operating the Grill 

      CAUTION: 

Use only the regulator provided. If a replacement is necessary, call our customer service center. The use of 
unauthorized parts can create an unsafe condition or environment and will void the warranty

 

The propane gas supply cylinder used must be constructed and marked in accordance with the 

Specifications for Propane Gas 

Cylinders

 of the U.S. Department of Transportation (DOT). Only cylinders with a listed overfill prevention device (OPD) and 

marked “propane” may be used. Cylinders with an OPD will have valve handles with three “lobes” (prongs).  

The pressure regulator and hose assembly supplied with the outdoor cooking gas appliance must be used. Replacement pressure 
regulators and hose assembly must be those specified by the outdoor cooking gas appliance manufacturer. Use only 20-pound 
cylinders equipped with a cylinder connection device compatible with the connection for outdoor cooking appliances. The cylinder 
must include a collar to protect the cylinder valve. The gas cylinder should not be dropped or handled roughly. If the appliance is 
not in use, the gas cylinder must be disconnected.  

Storage of the appliance indoors is permissible ONLY if the cylinder is disconnected and removed from the appliance. Cylinders 
must be stored outdoors and out of the reach of children. Cylinder must not be stored in a building, garage or other enclosed areas. 
Your cylinder must never be stored where temperatures can reach over 125°F. 

Before connecting, make sure there is no debris caught in the head of the gas cylinder, regulator valve or in the head of the burner 
and burner ports. Connect regulator valve and hand tighten firmly. Disconnect the propane cylinder from the regulator valve when 
the grill is not in use. DO NOT obstruct the flow of combustion air or ventilation air to the grill. The propane cylinder must be 
arranged for vapor withdrawal and equipped with a listed overfill prevention device (OPD). 

     Danger: A fire causing death or serious injury may occur if the following is not followed exactly:             

 

Never store or use gasoline or other volatile substances in the vicinity of this grill.

      

Never store a spare propane cylinder in the vicinity of this grill, or in the vicinity of another 
potential heat source.

 

Never fill the propane cylinder beyond 80% full. 

This grill is designed to connect to a standard 20 lb L.P. cylinder only, please refer to the assembly instructions for the installation. 

              
                 

Warning: Don’t store spare gas cylinder in or near grill. 

 

 

Right Side

 

 

 

Left Side

 

Fully Assembled View

 

 

 

Содержание Signature 6500 Series



















Отзывы: