background image

12

ENGLISH

(Original instructions)

13

ENGLISH

(Original instructions)

u

  If the supply cord is damaged, it must be replaced by the 

manufacturer or an authorised BLACK+DECKER Service 

Centre in order to avoid a hazard.

Features

This appliance includes some or all of the following features.

  1. Power head

  2. Main handle

  3. Bail handle

  4. On/off switch

  5. Lock off switch

  6. Chainsaw attachment

  7. Chainsaw attachment release button

  8. Kick back guard

  9. Kick back guard release button

 10.  Guide bar

 11.  Saw chain

 12. Guide bar cover

 13. Hedge trimmer attachment

 14. Hedge trimmer release button

 15. Hedge trimmer blade

 16.  Guard

 17.  Extension pole

 18.  Pole grip

 19. Extension pole release button

 20.  Battery

Charging a battery (fig. A1)

BLACK+DECKER chargers are designed to charge 

BLACK+DECKER battery packs. 

u

  Plug the charger (21) into an appropriate outlet before

  inserting a battery pack (20).

u

  Insert the battery pack (20) into the charger, making sure 

the battery pack is fully seated in the battery slots (Figure 

A1). 

The LED (21a) will flash indicating that the 

battery is being charged.

The completion of charge is indicated by the 

LED remaining on continuously. The pack is 

fully charged and may be used at this time or 

left in the charger.

u

  Recharge discharged batteries as soon as possible after 

use or battery life may be greatly diminished.  

For longest battery life, do not discharge batteries fully. 

It is recommended that the batteries be recharged after 

each use.

Charger diagnostics (fig. A2)

This charger is designed to detect certain problems that can

arise with the battery packs or the power source. Problems

are indicated by one LED flashing in different patterns.

To ensure continued safe operation, check the 

chain tension as described in this manual after 

every 10 minutes of use, and adjust back to a 

clearance of 3 mm as required. Oil the chain 

after every 10 minutes of use.

Direction of rotation of chain

Warning!

 Do not touch chain at the chip ejec

-

tion point.

Directive 2000/14/EC guaranteed sound 

power.

Additional safety instructions for batteries and 

chargers

Batteries

u

  Never attempt to open for any reason.

u

  Do not expose the battery to water.

u

  Do not store in locations where the temperature may 

exceed 40 °C.

u

  Charge only at ambient temperatures between 10 °C and 

40 °C.

u

  Charge only using the charger provided with the tool.

u

  When disposing of batteries, follow the instructions given 

in the section "Protecting the environment".

p

Do not attempt to charge damaged batteries.

Chargers

u

  Use your BLACK+DECKER charger only to charge the 

battery in the tool with which it was supplied. Other batter-

ies could burst, causing personal injury and damage.

u

  Never attempt to charge non-rechargeable batteries.

u

  Have defective cords replaced immediately.

u

  Do not expose the charger to water.

u

  Do not open the charger.

u

  Do not probe the charger.

$

The charger is intended for indoor use only.

+

Read the instruction manual before use.

Electrical safety

#

Your charger is double insulated; therefore no 

earth wire is required. Always check that the 

mains voltage corresponds to the voltage on 

the rating plate. Never attempt to replace the 

charger unit with a regular mains plug.

93

Содержание SEASONMASTER BCASK861D





















Отзывы: