Black & Decker REVHD12C, Быстрый старт

Страница: 9 / 12

8 9
Slide the speed selector (6) towards the front of the tool (2nd
gear).
Screwdriving
u
Always use the correct type and size of screwdriver bit.
u
If screws are difficult to tighten, try applying a small
amount of washing liquid or soap as a lubricant.
u
Always hold the tool and screwdriver bit in a straight line
with the screw.
Troubleshooting
Problem Possible cause Possible solution
Unit will not
start.
Battery not
charged.
Check battery charging
requirements
Battery will not
charge.
Charger not plugged
in.
Surrounding air
temperature too hot
or too cold.
Plug charger into a working
outlet.
Move charger to a surrounding air
temperature of above 40
degrees F (45ºC) or below
105 degrees F (+40.5ºC)
Unit shuts off
abruptly.
Battery hasreached
its maximum
thermal limit.
Out of charge. (To
maximize the life of
the battery it is
designed to shutoff
abruptly when the
charge is
depleted
Allow battery to cool down.
Place on charger and allow to
charge.
Maintenance
Your BLACK+DECKER tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
Warning! Before performing any cleaning or maintenance on
the tool, unplug the charger.
u
Regularly clean the ventilation slots in your tool using a
soft brush or dry cloth.
u
Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed
of with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions.
Further information is available at
www.2helpU.com
Technical data
REVHD12C H1
Voltage V
DC
12
No-load speed min
-1
0-350 / 0-1350 /min (RPM)
Max. torque Nm 17.5/40
Chuck capacity mm 1-10
Max Drilling capacity
Steel/Wood/Masonry mm 10 / 25 / 10
Weight kg 1.0
Integral Battery
Battery type Li-Ion
Ah rating 1.5
Charger S010*1400040
Input Voltage V
AC
230
Output voltage V
DC
10.8
Current mA 400mA
Approx. charge time h 4
Level of sound pressure according to EN 62841:
Sound pressure (L
pA
) 84, uncertainty (K) 5 dB(A)
Sound power (L
WA
) 95 dB(A), uncertainty (K) 5 dB(A)
Vibration total values (triax vector sum) according to EN 62841:
Drilling metal (a
h
) 0.9 m/s
2
, uncertainty (K) 1.5 m/s
2
Hammer drilling into concrete (a
h
) 17.1 m/s
2
, uncertainty (K) 1.5 m/s
2
Declaration of conformity
The Supply of Machinery (Safety)
Regulations 2008
REVHD12C Impact Drill
Black & Decker declares that these products described under
“technical data” are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN62841-1:2015, EN62841-2-1:2018+A11:2019.
These products also conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016,
S.I.2016/1091 (as amended).