2
A
B
C
D
INSTALLATION:
A.
Use Mounting Bracket (
1
) to determine a desired location. Use the Mounting Bracket Holes (
2
) to mark the
screw hole locations, as shown.
B.
If installing into a stud, drill 1/ 8” holes and do not use the Anchors.
If installing into drywall, drill two
1/4” holes (
3
) as shown. Insert Anchors (
4
) into the holes and tap flush with wall.
C.
Install Mounting Bracket (
1
) by using the screws (
5
) over the Anchors (
4
). Mounting Bracket (
1
) must be vertically
leveled.
D.
Place the Mounting Post (
6
) over Mounting Bracket (
1
). Orient Mounting Post (
6
) so that the Ring (
7
) hangs
down. Secure by tightening Set Screw (
8
) onto Decorative Post (
6
).
Do Not Over Tighten!
MAINTENANCE AND CARE
Cleaning Instructions:
For all handles and decorative finishes, use only a soft damp cloth to clean and shine. Use of polish, detergents, abrasive
cleaners, organic solvents, or acid may cause damage. Use of other than a soft damp cloth will nullify our warranty!
Special Trim:
Trim products which contain porcelain or other similar substances are not acceptable for public areas or commercial use.
Installation of said trim is at user’s risk!
1
4
4
5
5
1
4
3
1
3
8
7
1
2
6
7
8
6
