CARE AND MAINTENANCE
Storage
1. Make sure that the 115 Volt AC and USB receptacle covers are functioning
properly and are in the closed position covering the receptacles when storing the
POWER TO GO
®
.
2. Ideal storage temperature range is 0-40°C (32-104°F).
3. Store and use the POWER TO GO
®
in a cool, dry place with adequate
ventilation for all-around air circulation.
4. Avoid locations that are exposed to heating units, radiators, direct sunlight, or
excessive humidity or dampness.
Battery Replacement
The battery should last the service life of the POWER TO GO
®
. Contact Technical
Support toll free at (800) 544-6986 for any information you may need.
Safe Battery Disposal
The POWER TO GO
®
contains a nickel metal hydride rechargeable
battery, which must be must be disposed of properly when it will
no longer retain a charge. For information on recycling this battery,
call toll-free (877) 822-8837.
WARNINGS: TO REDUCE THE RISK OF INJURY / EXPLOSION
• Do not dispose of batteries in fire as this may result in an explosion.
• Do not expose the unit containing a battery to fire or intense heat as it
may explode.
TROUBLESHOOTING
Common Audio/Visual Problems
Problem: Buzzing Sound In Audio Systems
Some inexpensive stereo systems make a buzzing sound when operated from
the inverter, because the power supply in the electronic device does not properly
filter the modified sine wave produced by the inverter. The only solution to this
problem is to use a sound system that has a higher quality power supply.
Fault LED Lights
When the Power/Fault LED changes from green (indicating the unit is powered and
working properly) to red, a fault condition is present and the unit will automatically
shut down. See “Protective Features” on page 10 and “Common Power Output
Problems” in the section that follows.
9
CPI20XB_ManualEN_041307.qxp 6/25/07 2:07 PM Page 9
