Black & Decker PD1420L, Руководство пользователя

Страница: 12 / 32

12
ENGLISH (Original instructions)
Chargers
Your charger has been designed for a
mains voltage corresponds to the voltage
on the rating plate.
Warning! Never attempt to replace
the charger unit with a regular mains
plug.
u
Use your Black & Decker charger only
to charge the battery in the appliance
with which it was supplied. Other bat-
teries could burst, causing personal
injury and damage.
u
Never attempt to charge nonrecharge-
able batteries.
u
If the supply cord is damaged, it must
be replaced by the manufacturer or
an authorised Black & Decker Service
Centre in order to avoid a hazard.
u
Do not expose the charger to water.
u
Do not open the charger.
u
Do not probe the charger.
u
The appliance/battery must be placed
in a well ventilated area when charg-
ing.
Electrical safety
Symbols on the charger
Read all of this manual carefully before using the
appliance.
# This tool is double insulated; therefore no earth wire
is required. Always check that the power supply
corresponds to the voltage on the rating plate.
w Short circuit proof safety isolating transformer. The
mains supply is electrically separated from the
transformer output.
x The charger automatically shuts off if the ambient
temperature becomes too high. As a consequence
the charger will be inoperable. The charging base
must be disconnected from the mains supply and
taken to an authorised service centre for repair.
$ The charging base is intended for indoor use only.
Features
This tool includes some or all of the following features.
1. On/off power switch
2. Removable handle
3. Handle release ring
4. Hose
5. Transparent door
6. LED charging indicator
7. Battery housing
8. Door latch
9. Bowl release button
10. Removable dust bowl
11. Accessory clip
12. 2-in-1 combi nozzle accessory
13. Crevice tool
Pet head (PD1420LP only) 14.
15.
16.
Charging base
Accessory storage mount
-
ever worn or damaged.
dealer (cat. no. VF90):
Battery
Z
If you want to dispose of the product yourself, the
battery must be removed as described below and
disposed of in accordance with local regulations.
u
Run the battery down completely.
u
Remove the dust bowl.
u
Remove the two screws from inside the tunnel that the
u
Detach all lead connections from the battery pack.
u
Carefully remove the cover which hold the battery pack in
place.
u
Remove battery pack and place in suitable packaging to
ensure that the terminals cannot be short-circuited.
u
Take the battery to your service agent or to a local recy-
cling station.