Black & Decker PD1200AV Dustbuster, Оригинальное руководство пользователя

Страница: 7 / 56

6
ENGLISH (Original instructions)
7
ENGLISH (Original instructions)
EN
u
Injuries caused when changing any
parts or accessories.
u
Injuries caused by prolonged use of
the appliance. When using any appli-
ance for prolonged periods ensure you
take regular breaks.
Electrical safety
The appliance is designed for use with
12V negative ground vehicle battery
systems.
Warning! The cigarette lighter connec-
tor is fitted with a non-serviceable safety
fuse. The fuse may operate in the event
of a fault. If this occurs the fuse must be
replaced together with the connector and
cable by the manufacturer or an author-
ised BLACK+DECKER Service Centre in
order to avoid a hazard.
Warning! Do not operate the appliance
with systems which have positive ground
or a different voltage.
Features
This appliance includes some or all of the following features.
1. On / Off switch
2. Removable handle
3. Handle release ring
4. Hose
5. Transparent door
6. Cigarette lighter connector
7. Door latch
8. Bowl release button
9. Removable dust bowl
10. Accessory clip
11. 2-in-1 combi nozzle accessory
12. Crevice tool
Assembly
Mounting accessories (fig. B, C, D, E,
F & G)
The 2-in-1 combi nozzle (11) has a brush that can be folded
forward for dusting and upholstery cleaning
u
To fit an accessory press the accessory clip (10) and slide
the accessory onto the handle (2) (Fig. B & C).
u
To remove an accessory, press the accessory clip (10)
and remove the accessory.
The handle (2) can be removed from the hose (4) allowing
the accessories to be connected directly to the hose when
required. To remove the handle:
u
Unclip the handle (2) from the appliance.
u
Rotate the handle release ring (3) anti-clockwise to
release the clips (Fig. D).
u
Pull the hose (4) away from the handle (2) (Fig. E).
u
Fit the accessory directly to the hose cuff (Fig. F)
To refit the handle:
u
Remove the accessory from the hose.
u
Push the hose (4) into the handle (2). Rotate the handle
release ring (3) clockwise until it clicks into place
Use
Connecting to the vehicle’s power
supply
u
Make sure that the appliance is switched off.
u
Remove the cigarette lighter from it’s socket.
u
Plug the connector (6) into the cigarette lighter socket.
Switching on and off (fig. A)
u
To switch on, slide the on/off switch (1) to the right.
u
To switch off, slide the on/off switch (1) to the left until it
clicks into the off position.
The appliance can be used for periods of up to 30 minutes
without noticeably affecting the power of a normally charged
car battery in good condition.
Warning! Extended use will drain the battery power. Do not
run the vehicle’s engine while cleaning as this can shorten the
life of the appliance.
Vacuuming
u
When operating the appliance, make sure that the hose is
not trapped, twisted or blocked.
u
The handle (2) can be easily removed from the appliance
allowing you to reach up to 1.5 m from the appliance.
u
With the handle (2) removed, the appliance can be carried
using the built-in handle.
u
The handle (2) can also be removed from the hose (4) so
that you can connect an accessory directly to the hosecuff
when required.