Black & Decker Palm sander, Руководство пользователя, Страница: 10 / 13

10
Hints for optimum use
X
Always hold the tool with both hands (fig. S).
X
Do not place your hands over the ventilation slots.
X
Do not exert too much pressure on the tool.
X
Regularly check the condition of the sanding sheet. Replace
when necessary.
X
Always sand with the grain of the wood.
X
When sanding new layers of paint before applying another
layer, use extra fine grit.
X
On very uneven surfaces, or when removing layers of paint,
start with a coarse grit. On other surfaces, start with a
medium grit. In both cases, gradually change to a fine grit
for a smooth finish.
X
Consult your retailer for more information on available
accessories.
MAINTENANCE
Your Black & Decker tool has been designed to operate over
a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Before performing any maintenance, switch off and unplug
the tool.
X
Regularly clean the ventilation slots in your tool using a soft
dry brush or dry cloth.
X
Regularly clean the motor housing using a clean damp
cloth. Do not use any abrasive or solvent-based cleaner.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
X
Safely dispose of the old plug.
X
Connect the brown lead to the live terminal in the new plug.
X
Connect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 5 A.
Protecting the environment
Should you find one day that your tool needs
replacement, or if it is of no further use to you, think
of the protection of the environment. Black &
Decker repair agents will accept old Black & Decker
tools and ensure that they are disposed of in an
environmentally safe way.
Separate collection of used products and packaging
allows materials to be recycled and used again. Re-
use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this
service please return your product to any authorised repair
agent who will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of
our after-sales service and contacts are available on the
Internet at:
www.2helpU.com .
Technical data
EC declaration of conformity
KA226, KA250, KA260GT
Black & Decker declares that these products conform to:
98/37/EC, 89/336/EEC, EN 60745, EN 55014, EN61000
L
pA
(sound pressure) 76 dB(A),
L
WA
(acoustic power) 87 dB(A),
hand/arm weighted vibration <12.1 m/s 2
Kpa (sound pressure uncertainty 3 dB(A),
Kwa (sound power uncertainty 3 dB(A),
Kevin Hewitt
Director of Consumer Engineering
Spennymoor, County Durham DL16 6JG,
United Kingdom
7-7-2005
KA226 KA250 KA260GT
Voltage Vac 230 230 230
Power input W 155 170 170
Oscillations (no load) min-1 26,000 26,000 26,000
Orbits (no load) min-1 13,000 13,000 13,000
Weight kg 1.26 1.26 1.26