Black & Decker NSVA315J, Руководство пользователя

Страница: 6 / 20

6
ENGLISH
Inspection and repairs
Before use, check the appliance for dam-
aged or defective parts.
Check for breakage of parts, damage to
switches and any other conditions that
may affect its operation.
u
Do not use the appliance if any part is
damaged or defective.
u
Have any damaged or defective parts
repaired or replaced by an authorized
repair agent.
u
Regularly check the charger lead for
damage. Replace the charger if the
lead is damaged or defective.
u
Never attempt to remove or replace
any parts other than those specified in
this manual.
Chargers
Your charger has been designed for a
specific voltage. Always check that the
mains voltage corresponds to the voltage
on the rating plate.
Warning! Never attempt to replace the
charger unit with a regular mains plug.
u
Use your BLACK+DECKER charger
only to charge the battery in the
appliance with which it was supplied.
Other batteries could burst, causing
personal injury and damage.
u
Never attempt to charge non-
rechargeable batteries.
u
If the supply cord is damaged, it must
be replaced by the manufacturer or an
authorised BLACK+DECKER Service
Centre in order to avoid a hazard.
u
Do not expose the charger to water.
u
Do not open the charger.
u
Do not probe the charger.
u
The appliance/battery must be
placed in a well ventilated area when
charging.
Electrical safety
Symbols on the charger
Read all of this manual carefully before using the
appliance.
#
This tool is double insulated; therefore no earth wire
is required. Always check that the power supply
corresponds to the voltage on the rating plate.
$
The charger is intended for indoor use only.
Labels on appliance
The following symbols appear on this appliance along with the
date code.
+
Read all of this manual carefully before
using the appliance
S003AQ-15
Only use with charger S003AQ-15
Features
This tool includes some or all of the following features.
1. Extension pole release button
2. On/Off switch
3. Dust chamber release button
4. Dust chamber
5. Floor head connector
6. Floor head
7. Charger
8. Extension pole
9. Handle
Assembly (Fig. A, B, C)
u
Push the handle (9) firmly into the extension pole (8) as
shown in figure A.
Note: This process only needs to be performed once, as you
will be unable to remove the handle from the extension pole
once it is locked in place.
u
Push the extension pole (8) into the opening on the
Dustbuster
®
until it clicks into place as shown in figure B.
To release the extension pole from the Dustbuster
®
press
the extension pole release button (1).