![Black & Decker LST1018 Скачать руководство пользователя страница 15](http://html.mh-extra.com/html/black-and-decker/lst1018/lst1018_instruction-manual_36695015.webp)
15
TROUBLESHOOTING
Problem
Possible Cause
Possible Solution
• Line wonʼt feed.
• Line tangled in spool.
• Unwrap 24 inches (610mm) of line and
rewind.
• Line fails to cut off.
• Line cutter in guard is damaged or missing.
• Return to service center for repair.
• Line extends past guard.
• Rewind or trim line to line cutter.
• Unit will not start.
• Battery not installed properly.
• Check battery installation.
• Battery not charged.
• Check battery charging requirements.
• Battery wonʼt charge.
• Battery not inserted into charger.
• Insert battery into charger until LED
appears.
• Charger not plugged in.
• Plug charger into a working outlet. Refer to
“Important Charging Notes” for more details.
• Check current at receptacle by plugging in a
lamp or other appliance.
• Check to see if receptacle is connected to a
light switch which turns power off when you turn
out the lights.
• Surrounding air temperature too hot or too cold.
• Move charger and tool to a surrounding air
temperature of above 40 degree F(4.5°C) or
below 105 degree F (+40.5°C).
For assistance, visit our website
www.blackanddecker.com
for the location of the service center nearest you or call the BLACK &
DECKER help line at
1-800-544-6986.
See ‘Tools-Electric’
– Yellow Pages –
for Service & Sales
Imported by
Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286 U.S.A.