Black & Decker LPHT120, Инструкция по эксплуатации

Страница: 12 / 44

troUBleshootING
If your Pole Trimmer does not operate correctly check the following:
Problem Possible Cause Possible solution
• Tool will not
start.
• Battery will not
charge.
• Battery not installed
properly.
• Battery not
charged.
• Lock-out button not
actuated.
• Pole connections
not properly
tightened.
• Battery not inserted
into charger.
• check battery installation.
• check battery charging
requirements.
• Pull back on lock button/
actuate trigger.
• refer to instruction manual
for pole connections.
• Insert battery into charger
until green leD appears.
For assistance, visit our website www.blackanddecker.com for
the location of the service center nearest you or call the
Black+Decker help line at 1-800-544-6986.
12
The RBRC
®
Seal
The RBRC® (Rechargeable Battery Recycling Corp­
oration) Seal on the nickel cadmium, nickel metal
hydride or lithium­ionbatteries (or battery packs)
indicates that the costs to recycle these batteries (or
battery packs) at the end of their useful life have already been paid
by BLACK+DECKER. In some areas, it is illegal to place spent
nickel cadmium, nickel metal hydride or lithium­ion batteries in
the trash or municipal solid waste stream and the Call 2 Recycle®
program provides an environmentally conscious alternative.
Call 2 Recycle, Inc., in cooperation with BLACK+DECKER and
other battery users, has established the program in the United
States and Canada to facilitate the collection of spent nickel
cadmium, nickel metal hydride or lithium­ion batteries. Help protect
our environment and conserve natural resources by returning the
spent nickel cadmium, nickel metal hydride or lithium­ion batteries
to an authorized BLACK+DECKER service center or to your local
retailer for recycling. You may also contact your local recycling
center for information on where to drop off the spent battery.
RBRC® is a registered trademark of Call 2 Recycle, Inc.
This Class B digital apparatus complies with Canadian ICES-003.
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
With the battery removed, use only mild soap and a damp cloth to
clean the tool. Never let any liquid get inside the tool; never immerse
any part of the tool into a liquid. Prevent the blades from rusting by
applying a film of light machine oil after cleaning.
servICe INForMAtIoN
all Black+Decker Service centers are staffed with trained
personnel to provide customers with efficient and reliable power tool
service. Whether you need technical advice, repair, or genuine factory
replacement parts, contact the Black+Decker location nearest
you. To find your local service location, call: 1-800-544-6986 or visit
www.blackanddecker.com.