8
Jumper Wires:
To feed any size jumper wire through a cabinet, use a 1/2” drill bit
AC Adapter Wire:
To feed the AC adapter wire through a cabinet, use a 3/8” drill bit
Routing Wires
For the cleanest installation for your cabinet type, we recommend routing wires using the tips below.
Be sure to use the provided wire clips and zip ties as needed.
7
Frameless Cabinets
Framed Cabinets
Run connector wires towards the back of cabinet
frames to hide the wires and secure with wire clips.
Loop any excess wire at the back of the cabinet
joint. If there is space between two side-by-side
cabinets, hide excess wire in the opening.
You can run wires through a cabinet’s walls using
a power drill and the bits noted below.
You can run wires through a cabinet’s frame using
a power drill and the bits noted below.
Running Wires Through Cabinets
