the outer cover. There are no user-serviceable parts inside. Repair should be done only
by authorized service personnel.
Note: If the power supply cord is damaged, it should be replaced by qualified
personnel or in Latin America by an authorized service center.
HOW TO USE
This appliance is intended for household use only.
GETTING STARTED
• Remove any labels, stickers or tags attached to the body or soleplate of the iron, and the plastic
band around the power plug.
• Remove and save literature.
• Please go to www.prodprotect.com/blackanddecker to register your warranty.
Note:
Use ordinary tap water for ironing. Do not use water processed through a home soften-
ing system.
Important: For optimum performance, let the iron stand for 90 seconds before
beginning to iron.
FILLING WATER TANK
1. Tilt the iron and using a clean measuring cup, pour water into water fill opening until the water
reaches the MAX mark on the water tank. Refill as needed.
2. Plug in the iron.
Tip:
If unsure of a garment’s fiber, test a small area (on an inside seam or hem)
before ironing.
STEAM IRONING
The Smart Steam
™
system automatically generates the right amount of steam for the fabric
type selected. Once you select the temperature, the Smart Steam
™
technology detects the
temperature and adjusts the steam power accordingly.
1. Turn the fabric select dial to appropriate setting (between 4 and 6) for your fabric. See fabric
guide on heel rest and read garment’s label to help you determine fabric type. Be sure there is
water in the reservoir. Steam is automatically turned off between settings 0 and 3.
2. When finished ironing, turn the fabric select dial to 0 and unplug the iron.
Important: Always stand the iron on its heel rest when powered on and not in use.
SPRAY
Tip:
Use
to dampen tough wrinkles at any setting
1. Be sure the iron is filled with water.
2. On first use, pump the button several times.
ANTI DRIP SYSTEM
The anti drip system prevents water spotting at low temperatures.
DRY IRONING
1. Turn the fabric select dial to setting 1, 2 or 3 (DRY) to iron without steam. The Smart
Steam
™
system will automatically turn steam off.
2. To dry iron at higher settings, empty the water from the reservoir to prevent steaming.
EMPTYING WATER TANK
Note:
It is not necessary to empty the water tank after each use.
1. Unplug the iron and let it cool.
2. To release the water, hold the iron over a sink with the tip pointing down. Water will empty
out the water-fill opening.
CARE AND CLEANING
This product contains no user serviceable parts. Refer service to qualified service personnel.
CLEANING OUTSIDE SURFACES
1. Make sure iron is unplugged and has cooled completely. Wipe the soleplate and outer surfaces
with a soft cloth dampened with water and mild household detergent. Never use abrasives,
heavy-duty cleansers, vinegar or scouring pads that may scratch or discolor the iron.
2. After cleaning, steam iron over an old cloth to remove any residue from the steam vents.
STORING YOUR IRON
1. Unplug the iron and let it cool completely.
2. Check that the fabric select dial is set to 0.
3. Store iron on its heel rest. Storing iron on its soleplate can cause leaks or damage.
NEED HELP?
For service, repair or any questions regarding your appliance, call the appropriate 800 number
on cover of this book. Please
DO NOT
return the product to the place of purchase. Also, please
DO NO
T mail product back to manufacturer, nor bring it to a service center. You may also want
to consult the website listed on this sheet.
Two-Year Limited Warranty
(Applies only in the United States and Canada)
What does it cover?
• Any defect in material or workmanship provided; however, Spectrum Brands’ liability will not
exceed the purchase price of product.
For how long?
• Two years from the date of original purchase with proof of such purchase.
What will we do to help you?
• Provide you with a reasonably similar replacement product that is either new or factory refurbished.
Please Read and Save this Use and Care Book.
IMPORTANT SAFETY INSTRUCTIONS
When using your iron, basic safety precautions should always be followed,
including the following:
• READ ALL INSTRUCTIONS BEFORE USING.
• Use iron only for its intended use.
• To protect against a risk of electric shock, do not immerse the iron in water or
other liquids.
• The iron should always be turned to the minimum (min) setting before plugging
or unplugging from outlet. Never pull on the cord to disconnect from the outlet;
instead grasp plug and pull to disconnect.
• Do not allow cord to touch hot surfaces. Let iron cool completely before putting
away. Loop cord loosely around iron when storing.
• Always disconnect iron from electrical outlet when filling with water or
emptying, and when not in use.
• Do not operate iron with a damaged cord, or if the iron has been dropped or
damaged. To avoid the risk of electric shock, do not disassemble the iron; take
it to a qualified service person for examination and repair, or call the appropriate
toll-free number on the cover of this manual. Incorrect reassembly can cause a
risk of electric shock when the iron is used.
• If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified person in order to avoid a hazard.
• Close supervision is necessary for any appliance being used by or near children.
Do not leave iron unattended while connected or on an ironing board.
• Burns can occur from touching hot metal parts, hot water or steam.
Use caution when you turn a steam iron upside down or use the surge
of steam—there may be hot water in the reservoir. Avoid rapid movement of
iron to minimize hot water spillage.
• This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the
appliance.
• The iron must be used and rested on a stable surface.
• When placing the iron on its stand, ensure that the surface on which the
stand is placed is stable.
• The iron is not to be used if it has been dropped, if there is visible signs of
damage or if it is leaking.
SPECIAL INSTRUCTIONS
• To avoid a circuit overload, do not operate another high-wattage appliance on
the same circuit.
• If an extension cord is absolutely necessary, use a cord rated 15 amperes
minimum. A cord rated for less amperage can result in a risk of fire or electric
shock due to overheating. Care shall be taken to arrange the cord so that it
cannot be pulled or be tripped over.
SAVE THESE INSTRUCTIONS.
This product is for household use only.
POLARIZED PLUG
This appliance has a polarized plug (one blade is wider than the other). To reduce the
risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If
the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact
a qualified electrician. Do not attempt to modify the plug in any way.
TAMPER-RESISTANT SCREW
Warning: This appliance is equipped with a tamper-resistant screw to prevent removal
of the outer cover. To reduce the risk of fire or electric shock, do not attempt to remove
How do you get service?
• Save your receipt as proof of date of sale.
• Visit the online service website at www.prodprotect.com/blackanddecker, or call toll-free
1-800-465-6070, for general warranty service.
• If you need parts or accessories, please call 1-800-738-0245.
What does your warranty not cover?
• Damage from commercial use
• Damage from misuse, abuse or neglect
• Products that have been modified in any way
• Products used or serviced outside the country of purchase
• Glass parts and other accessory items that are packed with the unit
• Shipping and handling costs associated with the replacement of the unit
• Consequential or incidental damages (Please note, however, that some states do not allow the
exclusion or limitation of consequential or incidental damages, so this limitation may not apply to you.)
How does state law relate to this warranty?
• This warranty gives you specific legal rights. You may also have other rights that vary from
state to state or province to province.
Veuillez lire et conserver ce guide d’entretien et d’utilisation.
IMPORTANTES CONSIGNES DE
SÉCURITÉ
Lorsqu’on utilise un fer, il faut toujours respecter certaines règles de sécurité
fondamentales, notamment les suivantes :
• LIRE TOUTES LES DIRECTIVES AVANT L’UTILISATION.
• Utiliser le fer uniquement aux fins pour lesquelles il a été conçu.
• Afin d’éviter les risques de choc électrique, ne pas immerger le fer dans l’eau ou
tout autre liquide.
• Toujours mettre le fer hors tension avant de le brancher ou de le débrancher.
Ne jamais tirer sur le cordon pour débrancher le fer. Saisir et tirer la fiche pour
débrancher le fer.
• Éviter de laisser le cordon entrer en contact avec des surfaces chaudes. Laisser
le fer refroidir complètement avant de le ranger. Enrouler le cordon lâchement
autour du fer avant de le ranger.
• Toujours débrancher le fer pour le remplir d’eau ou pour le vider, et lorsqu’il
ne sert pas.
• Ne pas utiliser le fer si le cordon est endommagé, si le fer a été échappé ou
endommagé. Afin d’éviter les risques de choc électrique, ne pas démonter le
fer. En confier l’inspection et la réparation au personnel d’un centre d’entretien
autorisé. Ou composer le numéro sans frais approprié indiqué sur la page
couverture du présent guide. Un assemblage incorrect peut provoquer un choc
électrique au moment de l’utilisation.
• Si le cordon d’alimentation est endommagé, le faire remplacer par le fabricant,
par son agent de service ou par une personne qualifiée afin d’éviter les risques.
• Exercer une étroite surveillance lorsque l’appareil est utilisé par un enfant ou
près d’un enfant. Ne pas laisser le fer sans surveillance s’il est branché ou s’il
se trouve sur une planche à repasser.
• Les pièces métalliques, l’eau chaude ou la vapeur peuvent occasionner des
brûlures. Retourner avec précaution un fer à vapeur ou prendre garde lorsqu’on
se sert du jet de vapeur, car de l’eau brûlante peut s’écouler du réservoir. Éviter
tout mouvement brusque lors du repassage afin de minimiser le déversement
accidentel d’eau brûlante.
• Cet appareil n’est pas conçu pour être utilisé par des personnes (notamment
des enfants) dont les capacités physiques, sensorielles ou mentales sont
réduites ou qui manquent d’expérience ou de connaissances, à moins qu’elles
ne soient supervisées ou dirigées par une personne responsable de leur
sécurité pendant l’utilisation.
• Les enfants doivent être supervisés afin d’éviter qu’ils ne jouent avec l’appareil.
• Le fer à repasser doit être utilisé et déposé sur une surface stable.
• Avant de déposer le fer à repasser sur son support, s’assurer que la surface
sur laquelle se trouve le support est stable.
• Ne pas utiliser le fer à repasser s’il a été échappé, s’il est visiblement
endommagé ou s’il fuit.
INSTRUCTIONS SPÉCIALES
• Pour éviter une surcharge du circuit, ne pas brancher un autre appareil haute
puissance sur le même circuit.
• Si l’emploi d’une rallonge est absolument nécessaire, utiliser un cordon de
15 ampères. Les cordons prévus pour une intensité inférieure risquent de
surchauffer. Faire preuve de prudence en veillant à ce que le cordon ne puisse
pas être tiré ou faire trébucher.
CONSERVER CES MESURES.
L’appareil est conçu pour une utilisation domestique
FICHE POLARISÉE
L’appareil est muni d’une fiche polarisée (une lame plus large que l’autre). Afin de
minimiser les risques de secousses électriques, ce genre de fiche n’entre que d’une
façon dans une prise polarisée. Lorsqu’on ne peut insérer la fiche à fond dans la
prise, il faut tenter de le faire après avoir inversé les lames de côté. Si la fiche n’entre
