English
4
nOTE:
The state of charge indicator is only an indication
of the charge left on the battery. It does not indicate tool
functionality and is subject to variation based on product
components, temperature and end-user application.
Fig. D
2
12
Extendable Crevice Tool
1. To extend the crevice tool
4
, pull it out from the
vacuum nozzle
3
until it clicks in place.
2. To collapse the crevice tool
4
, push it into the vacuum
nozzle
3
until it clicks in place.
Attaching Motorized Brush (Fig. G)
CAUTION:
The unit needs to be switched
off when the motorized brushis attached or detached.
nOTE: Do not use directly on pets.
1. Slide the vacuum nozzle
3
into the opening of the
motorized brush
10
.
2. Ensure that the plastic retaining tabs
12
engage with
the recesses
13
. An audible click will be heard.
Fig. E
13
3
12
10
Removing Motorized Brush
CAUTION:
The unit needs to be switched
off when the motorized brush is attached or detached.
1. Pull the the plastic retaining tabs
12
outward, away
from the recesses
13
.
2. Pull the vacuum nozzle
3
from the motorized brush
10
.
Dry pick up
For everyday spills of dry material.
-
Do not fill the dust bowl
5
beyond the end of
the filter.
Optimizing the suction force
In order to keep the suction force optimized, the filters must
be cleared regularly during use.
Emptying and cleaning the product.
Removing the dust bowl and filter (Fig. E, F)
WARNING:
The filter is reusable and
should be cleaned regularly.
1. Hold the dust bowl over a trash can before pressing the
dust bowl release button
6
to release the dust bowl
access door
11
as shown in figure E.
2. While holding the dust bowl over a trash can, lightly
shake it to empty the dust bowl
5
.
3. Lift the prefilter
12
out of the dust bowl
5
as shown
in figure F.
4. Lift the filter
13
out of the dust bowl
5
.
5. While holding the dust bowl over a trash can, empty the
dust bowl
5
.
6. Install the filter
13
into the dust bowl
5
, then install
the prefilter
12
into the dust bowl
5
.
7. Close the dust bowl access door
11
until it clicks firmly
into place.
WARNING:
Never use the appliance
without the filters. Optimum dust collection will only
be achieved with a clean filter.
Fig. E
6
11
Fig. F
7
5
13
Cleaning the dust bowl and filter
The prefilter
12
and filter
13
can be washed in warm
soapy water. The dust bowl
5
can be wiped clean with a
dry cloth.
1. Make sure the filter
13
, prefilter
12
and the
dust bowl
5
are dry before installing.
