Black & Decker GTC800, Оригинальное руководство пользователя

Страница: 10 / 16

10
Troubleshooting
If the tool does not operate correctly, check the following.
Fault Possible cause Action
Tool will not start. Battery not installed properly. Check the battery
installation.
Battery discharged. Fit a (fully) charged battery.
Lock-off button not actuated. Observe the starting
procedure.
Pole connections Check the connections.
not properly tightened.
Battery will not charge. Battery not installed properly. Check the battery installation.
Protecting the environment
Z
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
z
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Batteries
Z
Black & Decker batteries can be recharged many
times. At the end of their useful life, discard batteries
with due care for our environment:
u
Run the battery down completely, then remove it from the
tool.
u
NiCd, NiMH and Li-Ion batteries are recyclable. Take them
to any authorised repair agent or a local recycling station.
Technical data
GTC800 (H1)/GTC800P (H1)
/ GTC800NM (H1)
Voltage V
DC
18
Blade strokes (no load) min
-1
2,400
Blade length cm 43
Blade gap mm 12
Blade brake time s < 1.0
Weight (without battery) kg 3.2
Battery
Voltage V
DC
18
Capacity Ah 1.5
Weight kg 0.45
Charger 3 hr 1 hr
Input voltage V
AC
230 230
Approx. charging time h 3 1
Weight kg 0.4 1.2
Level of sound pressure, measured according to 2000/14/EC:
L
pA
(sound pressure) 82 dB(A), Uncertainty (K) 3dB(A)
L
WA
(sound power) 93 dB(A), Uncertainty (K) 3dB(A)
L
WA
(guaranteed) 95 dB(A), Uncertainty (K) 3dB(A)
Hand/arm weighted vibration value according
to EN 50144: < 2.5 m/s
2,
Uncertainty (K) 1.5 m/s
2,