Black & Decker GT110, Black & Decker

Страница: 6 / 8

6
u
In order wards with the growth.
Younger stems move outwards when the blade cuts
downwards, causing shallow patches in the hedge (fig. C2).
u
Take care to avoid any foreign objects. Especially avoid hard
objects such as metal wire and railings, as these could
damage the blades.
u
Regularly oil the blades.
Guidelines for trimming (Australia & New Zealand)
u
Trim hedges and shrubs with seasonal leaves (new leaves
every year) in December and March.
u
Trim evergreens in September and February.
u
Trim conifers and other fast growing shrubs every six weeks
from October until March.
Maintenance
Your Black & Decker tool has been designed to operate over a
long period of time with a minimum of maintenance. Continuous
satisfactory operation depends upon proper tool care and regular
cleaning.
Warning! Before performing any maintenance, switch off and
unplug the tool.
u
After use, carefully clean the blades. After cleaning, apply a
film of light machine oil to prevent the blades from rusting.
u
Regularly clean the ventilation slots in your tool using a
soft brush or dry cloth.
u
Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
u
Make sure all switches are free of debris before and after use.
Removing the guard (fig. A)
Warning! Remove the guard for servicing purposes only.
Always re-fit the guard after finishing servicing.
u
Insert small pins into the holes (9) at either side of the
bracket (8) and pull the guard (4) forward.
u
Remove the pins and take the guard off the tool.
Protecting the environment
Z
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
z
Separate collection of used products and packaging
allows materials to be recycled and used again. Re-use
of recycled materials helps prevent environmental
pollution and reduces the demand for raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair agent
by contacting your local Black & Decker ress
indicated in this manual. Alternatively, a list of authorised
Black & Decker repair agents and full details of our after-sales
service and contacts are available on the Internet at:
www.2helpU.com
Technical data
GT110
Input voltage V
AC
230
Power input W 420
Blade strokes (no load) min
-1
1,900
Blade length cm 50
Blade gap mm 16
Blade brake time s < 1.0
Weight (excl. supply cord) kg 2.3
office