Black & Decker GL546, Руководство пользователя

Страница: 7 / 68

7
ENGLISH
Tool runs slowly
◆
Check that the spool housing can rotate freely.
Carefully clean it if necessary.
◆
Check that the cutting line does not protrude more than
9 cm from the spool housing. If it does, cut it off so that it
just reaches the line trimming blade.
Automatic line feed does not work
◆
Keep the tabs depressed and remove the spool cover from
the housing.
◆
Lift the spool approx. 6 mm and pull the cutting line until
it protrudes 9 cm from the housing. If insufficient cutting
line is left on the spool, install a new spool of cutting line
as instructed above.
◆
Push the spool back into place and rotate it slightly until it
is seated.
◆
Align the tabs on the spool cover with the cut outs in the
housing.
◆
Push the cover onto the housing until it snaps securely
into place.
◆
If the cutting line protrudes beyond the trimming blade,
cut it off so that it just reaches the blade.
If the automatic line feed still does not work, try the following
suggestions:
◆
Carefully clean the spool housing.
◆
Remove the spool and check if the lever can move freely.
◆
Remove the spool and unwind the cutting line, then wind
it on neatly again as described above. Replace the spool
as instructed.
Spool is jammed
◆
Keep the tabs depressed and remove the spool cover from
the housing.
◆
Carefully clean the spool housing.
◆
Align the tabs on the spool cover with the cut outs in the
housing.
◆
Push the cover onto the housing until it snaps securely
into place.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
◆
Safely dispose of the old plug.
◆
Connect the brown lead to the live terminal in the new plug.
◆
Connect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality
plugs. Recommended fuse: 5 A.
Protecting the environment
Black & Decker provides a facility for recycling
Black & Decker products once they have reached the
end of their working life. This service is provided
free of charge. To take advantage of this service
please return your product to any authorised repair
agent who will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at:
www.2helpU.com
Technical data
GL546
Voltage V
AC
230
(Australia & New Zealand) V
AC
240
Power input W 300
No-load speed min
-1
9,500
Weight kg 2.2
EC declaration of conformity
GL546
Black & Decker declares that these products conform to:
98/37/EC, 89/336/EEC, 73/23/EEC, EN 60335, EN 55014,
EN 61000,
2000/14/EC, Lawn trimmer, L < 50 cm
Annex VIII, No. 0086
B.S.I., HP2 4SQ, United Kingdom
Level of sound pressure, measured according to 2000/14/EC:
L
pA
(sound pressure) 81 dB(A), L
WA
(acoustic power) 94 dB(A),
L
WA
(guaranteed) 96 dB(A)
Hand/arm weighted vibration value according to EN 786:
< 2.6 m/s
2
Kevin Hewitt
Director of Consumer Engineering
Spennymoor, County Durham DL16 6JG,
United Kingdom
1-10-2003
Guarantee
Black & Decker is confident of the quality of its products and
offers an outstanding guarantee. This guarantee statement is
in addition to and in no way prejudices your statutory rights.
The guarantee is valid within the territories of the Member
States of the European Union and the European Free Trade
Area.