Black & Decker G720R, Руководство оператора

Страница: 8 / 9

8 • ENGLISH
the removal capacity of the disc and avoids unnecessary
overloading.
Overload
Overloading will cause damage to the motor of your angle
grinder. This can happen if your angle grinder is subjected
to heavy duty use for prolonged periods of use. Do not in
any circumstances, attempt to exert too much pressure on
your angle grinder to speed up your work. The abrasive
discs operate more efficiently when a light pressure is
exerted, thus avoiding a drop in the speed of your angle
grinder.
MAINTENANCE
Keep guards, air vents and the motor housing as clear
as possible of dust and dirt. Wipe with a clean cloth and
blow through with a low-pressure air supply. Excessive
build-up of metal dust can cause tracking of electrical
current from the internal parts to exposed metal parts.
Do not overload your angle grinder. Overloading causes
a reduction in speed and efficiency, causing your angle
grinder to become too hot. If this happens, operate your
angle grinder under no load for one or two minutes until
it has cooled to normal operating temperature. Switching
your angle grinder off under load will reduce the life of the
switch.
CLEANING
Use only mild soap and a slightly damp cloth to clean your
angle grinder. Many household cleaners contain chemicals
which could seriously damage the plastic. Also, do not
use petrol, turpentine, lacquer or paint thinners or similar
products. Never let any liquid get inside the tool and never
immerse any part of the tool into liquid.
Important!
To assure product SAFETY and
RELIABILITY,
repairs, maintenance and adjustment (other than those
listed in this manual) should be performed by authorized
service centers or other qualified service personnel,
always using identical replacement parts.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker
product needs replacement, or if it is of no further
use to you, do not dispose of it with household
waste. Make this product available for separate
collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the household,
at municipal waste sites or by the retailer when you purchase
a new product.
SERVICE INFORMATION
Black & Decker offers a full network of company-owned and
authorized service locations. All Black & Decker Service
Centers are staffed with trained personnel to provide
customers with efficient and reliable power tool service.
For more information about our authorized service centers
and if you need technical advice, repair, or genuine factory
replacement parts, contact the Black & Decker location
nearest you.
NOTES
f
Black & Decker’s policy is one of continuous
improvement to our products and, as such, we reserve
the right to change product specifications without prior
notice.
f
Standard equipment and accessories may vary by
country.
f
Product specifications may differ by country.
f
Complete product range may not be available in all
countries.