7
E N G L I S H
ASSEMBLY
Processor bowl (fig. E)
The processor bowl can be used to whisk, chop or
knead large quantities of food.
◆
Place the bowl onto the shaft. There is no need
to turn it - it will lock in place by itself.
◆
Place the required accessory onto the shaft.
◆
Place the ingredients into the bowl.
◆
Place the main lid onto the bowl and lock it by
turning the lid counter-clockwise.
The food processor will not operate if the lid is not
correctly locked into position.
Citrus juicer (fig. G)
◆
Place the bowl onto the shaft.
◆
Place the juicer filter basket into the bowl and
lock it by turning it counter-clockwise.
◆
Fit the juicing cone over the drive shaft.
◆
Only use the juicer at minimum speed.
Blender attachment (fig. D)
Use the blender attachment for fine blending of
raw ingredients and blending of cooked
ingredients to a very smooth consistency.
◆
Make sure the food processor is unplugged
from the power source and switched off before
placing or removing accessories.
◆
Remove the main lid and the bowl.
◆
Fill the blender with ingredients and place the
blender lid.
◆
Remove the safety lid.
◆
Place the blender into the hole and lock it.
◆
Place the bowl and the main lid and lock the
main lid.
Slicing and shredding blades (fig. C)
◆
Make sure the food processor is unplugged
from the power source and switched off before
placing or removing accessories.
◆
Place the bowl on the drive shaft.
◆
Fit the desired blade into the holder disc.
◆
Place the holder disc into the bowl, on the
drive shaft.
◆
Place the main lid on the bowl and lock it.
Juice extractor (fig. B and F)
◆
Make sure the food processor is unplugged
from the power source and switched off before
placing or removing accessories.
◆
Place the bowl on the drive shaft.
◆
Place the juice extractor into the bowl, over the
drive shaft.
◆
Place the juice extractor lid and lock it.
USE
Do not run the food processor longer than
10 minutes (citrus juicer, juice extractor),
5 minutes (chopping, shredding, slicing and
whisking) or 1 minute (dough kneading).
Wait at least 5 minutes between each run.
Operating the appliance
◆
Fit the desired attachment.
◆
Plug in the food processor to the power source.
◆
To switch the food processor on: rotate the
dial to select the desired speed setting (1- 12).
◆
The speed setting can be varied during processing.
◆
For greater control, press the pulse button for
intermittent bursts of power.
◆
To switch the appliance off: rotate the dial to
the off position.
Please be aware of the cover interlock
safety feature when operating the
appliance. The appliance can not run
unless the main lid and either the safety lid
or the blender are also locked in place.
When one of the lids is not in place and
locked, the food processor will not run.
Food processor
◆
Place the safety lid into the hole and then lock
it by turning the lid counter-clockwise until the
arrow on the lid aligns with the arrow next to
the safety lid hole.
◆
Place the bowl on the drive shaft. Place the
required processing blade or accessory on the
shaft.
◆
Place the main lid on the bowl and then lock it
by turning the lid counter-clockwise until the
arrow on the lid aligns with the arrow next to
the safety lid hole.
