MODELS/MODELOS
❍
FP1000M
❍
FP1600B
❍
FP1700B
❍
FP1800B
FOOD PROCESSOR
PROCESADOR DE ALIMENTOS
Customer
Care
Line:
USA 1-800-231-9786
Acces
sories/Parts
(USA)
1-800-738-0245
For
online customer servic
e
and to
regis
ter
your pr
oduct, go to
www.pr
odprot
ect.com/applic
a
© 2011
Applica
Consumer Pr
oducts, Inc.
2011/2-7-36E/S
Servicio
para el client
e:
Méxic
o 01-800 714-2503
Accesorios/P
artes
(EE.UU)
1-800-738-0245
Para
servicio
al client
e y
para
regis
trar
su gar
antía, visit
e
www.pr
odprot
ect.com/applic
a
Please Read and Save this Use and Care Book.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed, including
the following:
❍
Read all instructions.
❍
To protect against risk of electrical shock do not immerse cord, plugs or appliance in water or
other liquid.
❍
Close supervision is necessary when any appliance is used by or near children.
❍
Unplug from outlet when not in use, before putting on or taking off parts and before cleaning.
❍
Avoid contacting moving parts.
❍
Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions,
or is dropped or damaged in any manner. Return appliance to the nearest authorized service
facility for examination, repair or electrical or mechanical adjustment. Or, call the appropriate
toll-free number on the cover of this manual.
❍
The use of attachments not recommended or sold by the manufacturer may cause fire, electric
shock or injury.
❍
Do not use outdoors.
❍
Do not let cord hang over edge of table or counter.
❍
Keep hands and utensils away from moving blade or disc while processing food to reduce the
risk of severe injury to persons or damage to the food processor. A scraper may be used, but
must be used only when the food processor is not running.
❍
Blade is sharp. Handle carefully.
❍
To reduce the risk of injury, never place cutting blade or discs on base without first putting bowl
properly in place.
❍
Be certain cover is securely locked in place before operating appliance.
❍
Never feed food by hand. Always use food pusher.
❍
Do not attempt to defeat the cover interlock mechanism.
SAVE THESE INSTRUCTIONS.
This product is for household use only.
Note: The maximum rating is based on the chopping blade. Other attachments may draw
significantly less power.
POLARIZED PLUG
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is
intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
TAMPER-RESISTANT SCREW
Warning: This appliance is equipped with a tamper-resistant screw to prevent removal of the outer cover. To reduce
the risk of fire or electric shock, do not attempt to remove the outer cover. There are no
user-serviceable parts inside. Repair should be done only by authorized service personnel.
ELECTRICAL CORD
The cord of this appliance was selected to reduce the possibility of tangling in or tripping over a longer cord. If more
length is needed, use an extension cord rated no less than 15 amperes. (For 220-volt rated products, use an extension
cord rated no less than 6 amperes.) When using an extension cord, do not let it drape over the working area or dangle
where someone could accidentally trip over it. Handle cord carefully for longer life; avoid jerking or straining it at outlet
and appliance connections.
Note: If the power-supply cord is damaged, it should be replaced by qualified personnel; in Latin America, by an
authorized service center.
† 1. Food pusher
Models FP1600B, FP1700B,
FP1800B (Part # 07255EZB)
Model FP1000M (Part # 07255EZH)
† 2. Processing workbowl cover
Models FP1600B, FP1700B,
FP1800B (Part # 77916) 8 cup
Model FP1000M (Part # 77944) 10 cup
† 3. Stainless steel slicing and shredding
disc Models FP1600B, FP1700B,
FP1800B (Part #77919) 8 cup
Model FP1000M (Part # 77792) 10 cup
† 4. Disc stem Models FP1600B, FP1700B,
FP1800B (Part # 77917) 8 cup
Model FP1000M (Part # 77789) 10 cup
† 5. Stainless steel chopping blade
Models FP1600B, FP1700B,
FP1800B (Part # 77920)8 cup
Model FP1000M (Part # 77942) 10 cup
† 6. 8-cup processing workbowl
Model FP1800B (Part # 77915)
Model FP1700B with handle
cover (Part # 77915)
Model FP1000B (Part # 77945) 10 cup
7. Base
8. Cord wrap (under base)
† 9. Non-skid suction feet (Part # 09183-1)
10. Control panel
11. Center post
12. Feed chute
13. Workbowl coupling
Models FP1600B, FP1700B,
FP1800B (Part # 77918) 8 cup
Model FP1000M (Part # 77943) 10 cup
Note: † indicates consumer replaceable/removable
parts
Product may vary slightly from what is illustrated.
CONTROL PANEL
The controls are located on the front of the base (A).
Press OFF/PULSE or ON to select a function (see directions below).
OFF/PULSE CONTROL
• Processor should be stored in OFF position and unplugged when not in use.
• Use PULSE for short processing tasks. This lets you control the size and uniformity
of foods being chopped.
• The OFF/PULSE button must be pressed and held for the appliance to operate in PULSE mode. When
released, the appliance will stop.
• The motor of the processor will run as long as the OFF/PULSE button is held down. Press the button and
then release to allow the blade to stop running and the food to fall to the bottom of the workbowl.
• Pulsing gives better control when chopping, mincing, mixing and blending foods. You can control the size
of the foods, from coarse to fine.
ON CONTROL
When the ON control is selected, the processor will run continuously until the OFF/PULSE button is pressed.
HOW TO USE
This product is for household use only.
• Remove all packing material and any stickers from the product.
• Please go to www.prodprotect.com/applica to register your warranty.
Important: Handle chopping blade and slicing and shredding disc carefully .They are very sharp.
• Wash all removable parts as instructed in CARE AND CLEANING section of this manual.
• Select a level, dry countertop where the appliance is to be used, allowing air space on all sides to provide
proper ventilation for the motor.
ASSEMBLING THE PROCESSOR
HOW TO INSERT AND REMOVE THE CENTER POST
The center post is removable:
1. Turn the bowl upside down.
2. Grasp the clear outer tabs and turn the center post clockwise until the lower tabs
are free. Lift the post out (B).
3. To return to its original position, place center post into smaller opening in bottom of
workbowl and turn counterclockwise until tabs snap into place.
HOW TO LOCK THE PROCESSING WORKBOWL IN POSITION
1. Attach center post to workbowl. Place the workbowl on the base with handle turned
to the right of the locking mechanism (C) over the unlock symbol
.
2. Hold handle and rotate workbowl clockwise toward the lock symbol
until it clicks
firmly into place (D).
Note: Be sure to lock the workbowl in place before attaching the chopping blade or the
slicing and shredding disc and the cover.
HOW TO CHOP IN THE PROCESSING WORKBOWL
The chopping blade is used to coarsely or finely chop, mince, mix, and puree foods to a smooth consistency.
1. Lock workbowl into position (see Illustrations C and D).
2. Hold chopping blade by center shaft and insert onto center post (E).
Caution: The chopping blade is very sharp. Use caution when handling and storing.
3. Place food in workbowl.
4. Place cover on workbowl and lock into place by rotating clockwise (see Illustration H).
5. Place the food pusher in place.
Important: Never use your fingers to direct food through the feed chute.
6. Select your desired speed (PULSE or ON).
Note: Process foods for no more than a few seconds at a time. Pulsing produces excellent results and offers
greater control.
Important: Make sure the chopping blade has completely stopped spinning before removing cover from
processing bowl.
7. Press the OFF/PULSE button and allow the chopping blade to stop revolving before removing cover. Twist
cover toward
(counterclockwise) to remove.
Important: Unlock lid first before removing workbowl.
8. Unlock workbowl by turning it counterclockwise and lift off base.
Note: Remove workbowl from appliance before removing the chopping blade to prevent food from leaking
through the center opening of the workbowl.
9. Carefully remove the chopping blade.
10. Unplug appliance when not in use.
HELPFUL TIPS FOR CHOPPING
• Watch carefully to avoid over-processing foods.
• The PULSE button offers the best control.
• For best results, process foods that are about the same size.
• Do not overload the workbowl.
• Never walk away from the processor while it is on.
• You may use hot but not boiling liquids.
• Do not process more 3 cups of liquid in the workbowl at any given time.
• To process meat, use no more than 2 cups of ¾-inch cubes. Process using PULSE in 5-second intervals.
• Insert a funnel into the feed chute when adding ingredients such as oil, flour and sugar.
HOW
TO
SLICE OR
SHRED IN
THE W
ORKBOWL
1.
Lock w
orkbowl
into
position (see
Illustr
ations C
and D
).
2.
Place
disc st
em ont
o cent
er pos
t in
workbo
wl.
3.
Carefull
y plac
e slicing
and shr
edding disc
on top
of disc
stem
with appr
opriate
side
up (depending
on w
ork to
be done)
(F).
Caution: The
slicing and
shredding
disc is
very
sharp. Use
caution
when handling
and st
oring.
4.
Place
cov
er on
workbo
wl and
lock
into
place
by rot
ating co
ver
clockwise
(see
Illustr
ation H
).
5.
Fill feed
chute
with food.
P
osition food
pusher ov
er food
(G).
6.
Select
the PULSE
or ON
contr
ol; pr
ess
firmly
on food
pusher to
guide food
through
feed
chute,
but do
not for
ce
it.
Note:
Heavy
pres
sure
on the
pusher does
not speed
the w
ork; use
the pusher
only
as a
guide. Let
the pr
oces
sor do
the w
ork.
7.
When finished,
pres
s OFF/PULSE
and wait
for
disc to
stop
rot
ating bef
ore
remo
ving
cov
er. T
wist c
over
towar
d
count
ercl
ockwise to
remo
ve.
Important:
Make
sure
the slicing
and shr
edding disc
has compl
etel
y st
opped spinning
befor
e remo
ving
cov
er fr
om pr
oces
sing bo
wl.
Important:
Unlock
lid fir
st bef
ore
remo
ving w
orkbowl.
8. Car
efully
remo
ve
the slicing
and shr
edding disc.
Unlock
workbo
wl by
turning it
count
ercl
ockwise and
lifting it
off the
base.
9. Unplug
appliance
when not
in use.
HELPFUL TIPS
WHEN SLICING
AND SHREDDING
•
Befor
e slicing
fruits and
veget
ables
in the
proc
essor,
cut a
thin slic
e fr
om the
bottom
of the
food
to
make
it flat.
•
Place
the food
cut side
down
in feed
chute.
•
Remove
seeds and
pits bef
ore
proc
essing.
•
Select
foods
that ar
e firm
and not
overripe.
•
Remove
the cor
e fr
om har
d veget
ables
such as
cabbage.
•
When slicing
thinner veget
ables,
cut them
just short
of the
length
of the
feed
chute
and st
and them
vertic
ally
in feed
chute
so the
y ar
e solidl
y pack
ed and
cannot
turn or
tilt.
•
Shred
hard
cheeses at
room
temper
ature.
•
Chill soft
and semi-har
d cheeses
befor
e shr
edding.
•
After
food
has been
proc
essed,
remo
ve
the co
ver
and inv
ert on
count
ertop.
Remove
the slicing
and
shredding
disc bef
ore
remo
ving the
workbo
wl fr
om the
proc
essor
. Plac
e the
disc on
top
of the
invert
ed
workbo
wl co
ver
.
HOW
TO
LOCK
THE CO
VER
1.
Place
cov
er ov
er w
orkbowl
with the
small lat
ch to
the right
of the
workbo
wl’s
handle
(H).
2.
Hold feed
chute
of w
orkbowl
cov
er and
rot
ate
cov
er cl
ockwise until
cov
er locks
into
place.
Important:
For
your
prot
ection this
appliance
has an
interl
ock sys
tem.
The
proc
essor
will not
operat
e unl
ess
the pr
oces
sing w
orkbowl
and co
ver
are
properl
y
lock
ed in
place.
3.
Insert the
food
pusher int
o the
feed
chute.
Note:
The
food
pusher is
used to
guide foods
through
the feed
chute
and can
be remo
ved
when adding
liquid
or additional
foods
while
the pr
oces
sor is
running.
CARE
AND CLEANING
This pr
oduct cont
ains no
user-serviceabl
e parts.
Refer
service
to
qualified servic
e per
sonnel.
Note:
Do
not att
empt to
sharpen the
cutting edges
of the
chopping blade
or slicing
and shr
edding disc.
They
are
permanently
sharpened at
the fact
ory and
will be
ruined if
sharpened.
CLEANING
Note:
Bef
ore
cleaning,
be sur
e unit
is turned
off and
cor
d is
unplugged.
•
Complet
ely
disassembl
e pr
oces
sor parts
befor
e washing.
•
Rinse parts
immediatel
y aft
er pr
oces
sing for
easy cl
eanup.
Caution: The
slicing and
shredding
disc is
very
sharp. Use
caution
when handling
and st
oring.
•
Wipe base
and feet
with a
damp cl
oth and
dry thor
oughly.
Stubborn spots
can
be remo
ved
by rubbing
with
a damp
cloth
and a
mild, nonabr
asive
cleaner
. Do
not immer
se base
in liquid.
•
All remo
vabl
e parts
can
be washed
by hand
or in
a dishwasher
. Hand
washing of
plastic
parts will
help to
maintain
the food
proc
essor’
s appear
ance.
•
If washing
by hand,
fill w
orkbowl
with hot
soapy wat
er and
rapidl
y raise
and lo
wer
the chopping
blade or
slicing and
shredding
disc up
and do
wn on
the cent
er shaft.
Caution: The
slicing and
shredding
disc is
very
sharp. Use
caution
when handling
and st
oring.
•
If washing
in a
dishwasher, plac
e remo
vabl
e parts
on top
rack
only
– not
in or
near ut
ensil bask
et.
•
Some st
aining of
parts may
occur
. If
so, mak
e a
paste
of 2
tabl
espoons of
baking soda
and 1
tabl
espoon of
water
. Appl
y to
stains
and let
stand
overnight.
Rinse and
dry.
•
Do not
use rough
scouring
pads or
cleanser
s on
any plas
tic or
metal
parts to
clean.
•
Do not
allow
chopping blade
or slicing
and shr
edding disc
to
soak in
water
for
long
periods of
time.
•
Remember to
clean
the int
ernal shaft
of the
chopping blade;
use a
baby bottl
e brush
to
remo
ve
any
clogged
food
particles.
•
If you
are
having tr
ouble
closing
the co
ver
over
the w
orkbowl,
apply
a small
amount of
veget
able
oil to
the
rim of
the co
ver
and w
orkbowl.
This should
make
the piec
es w
ork smoother
when att
aching the
cov
er to
the w
orkbowl.
A B C D E F G H I J K L M
A B C D E F G H I J K L M
A B C D E F G H I J K L M
A B C D E F G H I J K L M
A B C D E F G H I J K L M
A B C D E F G H I J K L M
A B C D E F G H I J K L M
A B C D E F G H I J K L M
NEED HELP?
For servic
e, repair or any ques
tions regar
ding your applianc
e, call the appr
opriate 800 number on the fr
ont of
this sheet. Please
DO NOT r
eturn the product t
o the place of pur
chase. Also, please
DO NOT mail pr
oduct back
to manuf
acturer, nor bring it t
o a service c
enter
. You may also want t
o consult the w
ebsite lis
ted on the c
over
of this manual.
TWO-YEAR LIMITED W
ARRANTY
(Applies only in the Unit
ed Stat
es and Canada)
What does it cov
er?
•
Any defect in mat
erial or workmanship pr
ovided; ho
wev
er, Applica’
s liability will not exc
eed the purchase
price of pr
oduct.
For ho
w long?
•
Tw
o year
s fr
om the
date
of original
purchase
with pr
oof of
such pur
chase.
What will we do t
o help you?
•
Provide y
ou with a reasonabl
y similar replac
ement product that is either ne
w or fact
ory refurbished.
How do y
ou get service?
•
Save y
our rec
eipt as proof of dat
e of sale.
•
Visit the online service w
ebsite at www
.prodpr
otect.c
om/applica, or c
all toll-fr
ee 1-800-231-9786, for
general warr
anty service.
•
If you need parts or ac
ces
sories, please c
all 1-800-738-0245.
What does your warr
anty not cov
er?
•
Damage from c
ommercial use
•
Damage from misuse, abuse or negl
ect
•
Products that hav
e been modified in any way
•
Products used or servic
ed outside the country of pur
chase
•
Glass parts and other ac
ces
sory items that ar
e packed with the unit
•
Shipping and handling cos
ts associat
ed with the replac
ement of the unit
•
Consequential or incidental damages (Pl
ease note, ho
wev
er, that some stat
es do not allow the e
xclusion or
limitation of c
onsequential or incidental damages, so this limit
ation may not apply t
o you.)
How does s
tat
e law relat
e to this warr
anty?
•
This warranty giv
es you specific l
egal rights. You may also hav
e other rights that vary fr
om stat
e to s
tat
e or
provinc
e to pr
ovinc
e.
Made and P
rin
ted in P
eople’s R
epublic of China.
Fabr
icado e Impr
eso en la República P
opular de China.
is a regis
ter
ed trademark of The Black & Deck
er Corporation, T
owson, Maryland, USA
es una marca r
egistr
ada de The Black & Decker Corpor
ation, Towson, Maryland, E.U.
