4
•
Do not use tool without safety warning label.
If
label is missing, damaged or unreadable, contact
1-800-544-6986
for a replacement. (Fig. 9)
•
Only use parts, fasteners and accessories
approved by Black and Decker.
•
Connect tool to air supply before
loading
fasteners, to prevent a fastener from being fired
during connection. The tool driving mechanism may
cycle when tool is connected to the air supply.
(Fig. 10)
•
Always assume the tool contains fasteners.
No
horseplay. Respect the tool as a working
implement. (Fig. 11)
•
Operator and bystanders should wear hard hats
to safeguard against possible injuries. (Fig. 12)
•
Do not load fasteners
with trigger or safety
depressed, to prevent unintentional firing of a
fastener. (Fig. 13
)
•
Remove finger from trigger
when not driving
fasteners. Never carry tool with finger on trigger. In
“Contact Actuation Mode” tool will fire a fastener if
safety is bumped while trigger is depressed.
(Fig. 14)
Fig. 9
Fig. 11
Fig. 10
Fig. 12
Fig. 13
Fig. 14
639225-00, FSNS125 12/13/05 3:01 PM Page 4
