Black & Decker DV7210F, Оригинальное руководство пользователя

Страница: 6 / 12

6
ENGLISH (Original instructions)
Features
This tool includes some or all of the following features.
1. On/off switch
2. Bowl release button
3. Charging indicator
4. Dust bowl
5. Nozzle
6. Extention tubes
7. Floor head
8. Charger
Fig. A
Charging base
9.
11. Filter
10. Quick clean filter housing
Assembly
These models may be supplied with some of the following
accessories:
Extention tubes (6).
Floor head (7).
7
12 7
7
Fit the extention tubes (6) together.
tubes.
Fit the narrow end of the extention tubes (6) into the appli-
ance.
Alternatively, to use as a hand-held cleaner with brush on
appliance.
Use
24 hours.
Place the appliance on the charging base whenever it is
not in use.
While charging, the charger may become warm. This is
normal and does not indicate a problem. The appliance can
indicator (3) will be lit as long as the appliance is connected to
the plugged-in charger.
Warning! Do not charge the battery at ambient temperatures
below 4 °C or above 40 °C.
To switch the appliance on, slide the on/off switch (1)
forward to position 1.
To switch the appliance off, slide the on/off switch (1) back
to position 0.
the bristles on the brush.
Lower the bristles for cleaning carpets or rugs.
tile or marble.
Optimising the suction force
cleared regularly during use.
Emptying and cleaning the product.
Press the release latchs (13) and pull the nozzle (5)
straight off.
Empty the contents of the bowl.
To replace the nozzle, place it back onto the handle until it
Charging the battery (Fig. C)
Make sure that the appliance is switched off. The battery
will not be charged with the on/off switch in the on
position.
Place the appliance on the charging base (9) (Fig. C).
Plug in the charger. Switch on at the mains. The
charging indicator (3) will be lit.
Leave the appliance to charge for at least 16 hours.
D
F