background image

4

ENGLISH

(Original instructions)

b.  Do not use the power tool if the switch does not turn it 

on and off. Any power tool that cannot be controlled with 

the switch is dangerous and must be repaired.

c.  Disconnect the plug from the power source and/or the 

battery pack from the power tool before making any 

adjustments, changing accessories, or storing power 

tools. Such preventive safety measures reduce the risk of 

starting the power tool accidentally.

d.  Store idle power tools out of the reach of children and 

do not allow persons unfamiliar with the power tool or 

these instructions to operate the power tool. Power 

tools are dangerous in the hands of untrained users.

e.  Maintain power tools. Check for misalignment or 

binding of moving parts, breakage of parts and any 

other condition that may affect the power tools 

operation. If damaged, have the power tool repaired 

before use. Many accidents are caused by poorly 

maintained power tools.

f.  Keep cutting tools sharp and clean. Properly 

maintained cutting tools with sharp cutting edges are less 

likely to bind and are easier to control.

g.  Use the power tool, accessories and tool bits etc. in 

accordance with these instructions, taking into 

account the working conditions and the work to be 

performed. Use of the power tool for operations different 

from those intended could result in a hazardous situation.

5. Service

a.  Have your power tool serviced by a qualified repair 

person using only identical replacement parts. This will 

ensure that the safety of the power tool is maintained.

b.  Recommendation that the tool always be supplied via 

residual current device with a rated residual current of 

30mA or less.

Using your appliance

u

  Do not use the appliance to pick up liquids or any materi-

als that could catch fire.

u

  Do not use the appliance near water.

u

  Do not immerse the appliance in water.

u

  Never pull the charger lead to disconnect the charger from 

the socket. Keep the charger lead away from heat, oil and 

sharp  edges.

u

  This appliance is not intended for use by young or infirm 

persons without supervision. Children must be supervised 

to ensure they do not play with the appliance.

After use

u

  Unplug the charger before cleaning the charger or charg-

ing base.

u

  When not in use, the appliance should be stored in a dry 

place.

u

  Children should not have access to stored appliances.

Inspection and repairs

u

  Before use, check the appliance for damaged or defective 

parts. Check for breakage of parts, damage to switches 

and any other conditions that may affect its operation.

u

  Do not use the appliance if any part is damaged or defec-

tive.

u

  Have any damaged or defective parts repaired or replaced 

by an authorized repair agent.

u

  Regularly check the charger lead for damage. Replace the 

charger if the lead is damaged or defective.

u

  Never attempt to remove or replace any parts other than 

those specified in this manual.

Additional safety instructions - batteries and charg-

ers

Batteries

u

  Never attempt to open for any reason.

u

  Do not expose the battery to water.

u

  Do not expose the battery to heat.

u

  Do not store in locations where the temperature may 

exceed 40°C.

u

  Charge only at ambient temperatures between 10°C and 

40°C.

u

  Charge only using the charger provided with the appli-

ance/tool. Using the wrong charger could result in an 

electric shock or overheating of the battery.

u

  When disposing of batteries, follow the instructions given 

in the section "Protecting the environment".

u

  Do not damage/deform the battery pack either by puncture 

or impact, as this may create a risk of injury and fire.

u

  Do not charge damaged batteries.

u

  Under extreme conditions, battery leakage may occur. 

When you notice liquid on the batteries carefully wipe the 

liquid off using a cloth. Avoid skin contact.

u

  In case of skin or eye contact, follow the instructions 

below.

Warning! The battery fluid may cause personal injury or 

damage to property. In case of skin contact, immediately rinse 

with water. If redness, pain or irritation occurs seek medical 

attention. In case of eye contact, rinse immediately with clean 

water and seek medical attention.

Chargers

Your charger has been designed for a specific voltage. Always 

check that the mains voltage corresponds to the voltage on 

the rating plate.

Warning! Never attempt to replace the charger unit with a 

regular mains plug.

u

  Use your Black & Decker charger only to charge the bat-

Содержание Dustbuster Flexi PD1800EL-XE









Отзывы: