Black & Decker DCM90, Инструкция по эксплуатации

Страница: 8 / 27

Aroma Feature
This feature slows the brew cycle slightly to
provide a richer flavour if so desired. The aroma
feature can only be set when the coffee maker is
on or the timer is programmed and set. Press
the ‘AROMA’ button (3.4) to turn the feature on,
press it again to turn it off. The display will show
the aroma icon.
Clean
The clean icon will be displayed when the coffee
maker requires descaling. Follow the
instructions outlined in the ‘Care and Cleaning’
section. The clean icon will be displayed
continuously until reset by unplugging the coffee
maker from the mains supply.Replace the carafe
on the hotplate and allow the remainder of the
coffee to drip into the carafe.
LCD backlight setting function
The blue backlight display can be set to be
continuously on by pressing the ‘HOUR’ and
‘MIN’ buttons together for approximately 5
seconds. To revert to display back to the default
setting, press the ‘HOUR and ‘MIN’ buttons
together again for approximately 5 seconds.
Cleaning and maintenance
Warning! Before cleaning and maintenance,
switch the appliance off and remove the plug
from the socket.
• Using the handles, remove the filter (12) and
the filter holder (8) from the filter holder
compartment (9). Remove the used coffee
grounds from the filter.
• Wash the carafe (4), the filter holder and the
filter in hot, soapy water. Dry all parts and
refit them.
• Wipe the outside of the appliance with a
damp cloth.
Descaling the appliance
If the appliance is used in an area with hard
water, it is advised to descale the appliance
when from time to time.
• Use a commercial descaling agent for coffee
makers, or use water and vinegar as follows:
• Fill the water tank (7) and add 3 teaspoons of
vinegar. Operate the appliance as for making
coffee until the reservoir is empty.
• Discard the used water and repeat the
procedure 2 or 3 times with fresh water.
Technical data
8
ENGLISH
Voltage 220 – 240 Volts
(50-60 Hz)
Power 1000W
Weight 2.2kg