Black & Decker CM4200 Series, Руководство пользователя

Страница: 9 / 12

9
AUTO CLEAN
®
SYSTEM
De-scaling With Auto Clean™
Over time, calcium deposits or “scale” may build up in your brewer. Scale
is non-toxic but if scale is not cleaned regularly, your machine may not
brew properly or even permanently cease to function. Regularly de-scaling
your brewer helps to maintain quality coffee as well as the lifespan of the
heating element, and other internal parts that come in contact with water
throughout the brew process.
To make the de-scaling process as effortless as possible, an Auto Clean™
system has been programmed into your coffeemaker.
When should I use Auto Clean™?
After every 60 brews, the word “CLEAN” will be displayed and blink. This
notifies you it is time to run the Auto Clean™ system. “CLEAN” will be
displayed until you run the Auto Clean™ system. If you would like to clean
your coffeemaker prior to 60 brew cycles, you may do so by following the
steps below.
How do I use Auto Clean™?
Follow the simple steps below. Your coffeemaker will take care of the rest.
1. In the carafe combine by filling to the icon with white vinegar, then
adding to the icon with cold water.
2. Pour into water reservoir.
3. Place an 8 to 12 cup basket style paper filter
in the filter basket. Place
basket into filter basket holder. Close filter basket cover.
4. Make sure the lid of the carafe is closed and place empty carafe on the
carafe plate.
5. Plug power cord into an outlet.
6. Turn the serving control dial to the
position.
7. Press CLEAN to activate cleaning cycle; the word CLEAN is displayed.
8. Part of the mixture will brew through. Remaining mixture will be held in
coffeemaker for 30 minutes before completing its brew through.
Note: The entire cleaning cycle will take 45–60 minutes to complete.
9. When the coffeemaker completes the AUTO CLEAN cycle, it shuts off
automatically.
10. Brew fresh water through appliance following instructions given in
GETTING STARTED before brewing coffee again.