Black & Decker BPACT08 SERIES, Инструкция по эксплуатации

Страница: 11 / 24

Page 11
EXHAUST HOSE INSTALLATION
The air exhaust hose and hose inlet must be installed or removed from the portable
air conditioner in accordance with the way it is being used:
COOL, AUTO, DEHUMIDIFY : Air exhaust hose and hose inlet should be connected to
the portable air conditioner.
FAN : Air exhaust hose and hose inlet should be disconnected from the portable air
conditioner.
To install:
1. Connect hose inlet to one end of air exhaust hose. Push hose inlet over the end
of the hose, push in slightly and then start threading it on in a counter clockwise
direction. (see Fig 1)
2. Connect hose outlet to other end of air exhaust hose. Push hose outlet over the
end of the hose, push in slightly and then start threading it on in a counter
clockwise direction. (see Fig 2)
3. Align window bracket/air intake hose connector with hose outlet and push in until
it locks into place. You will hear a clicking sound when it does. (see Fig 3)
4. Place the hose inlet against the air outlet opening hook on the back of the portable
air conditioner and firmly push and rotate counter clockwise to lock it into place.
(see Fig 4)
5. After connecting the hose inlet to the unit, insert the window bracket/air intake
hose connector into the opening of the window bracket. Align connector with the
opening on the inside (side with the channels) of the window bracket and push in
until it locks into place. You will hear a clicking sound when it does.
(see Fig 5).
NOTE:
The exhaust hose can be compressed or extended
moderately, but it is desirable to keep the length to a
minimum. Also make sure that the hose does not
have any sharp bends.
Hook
SET UP & USE
Fig. 1
Fig. 2 Fig. 3
Fig. 4 Fig. 5