8
ENGLISH
(Original instructions)
Clamp a piece of plywood or soft wood to the back of the
workpiece and saw through the combination in order to
obtain a clear cut.
Do not force the cutting blade into the workpiece. Note
that cutting sheet metal will normally take more time than
sawing thicker wooden workpieces.
-
ting line before cutting.
When sanding new layers of paint before applying another
On very uneven surfaces, or when removing layers of
paint, start with a coarse grit. On other surfaces, start with
Consult your retailer for more information on available
accessories.
Maintenance
Your Black & Decker corded/cordless appliance/tool has been
designed to operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation depends
upon proper tool care and regular cleaning.
Warning! Before performing any maintenance on corded/
cordless power tools:
Switch off and unplug the appliance/tool.
Or switch off and remove the battery from the appliance/
tool if the appliance/tool has a separate battery pack.
Or run the battery down completely if it is integral and then
switch off.
Regularly clean the ventilation slots in your appliance/tool/
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
Protecting the environment
Z
Separate collection. This product must not be
disposed of with normal household waste.
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product avail-
able for separate collection.
z
Separate collection of used products and packag-
ing allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.
Local regulations may provide for separate collection of elec-
trical products from the household, at municipal waste sites or
by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
the address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Technical data
Voltage
V
AC
230
No-load speed
min
-1
10,000-22,000
Oscillating angle
Degrees
1.4 or 2.8
Power
W
300
Weight
kg
1.53
Level of sound pressure according to EN 60745:
Sound pressure (L
pA
) 90 dB(A), uncertainty (K) 3 dB(A)
Sound power (L
WA
) 101 dB(A), uncertainty (K) 3 dB(A)
Vibration total values (triax vector sum) according to EN 60745:
Cutting wood (a
h, CW
) 4.5 m/s
2
, uncertainty (K) 1.5 m/s
2
Cutting metal (a
h, CM
) 10.3 m/s
2
, uncertainty (K) 1.5 m/s
2
Sanding (a
h
) 11.4 m/s
2
, uncertainty (K) 1.5 m/s
2
Australia & New Zealand
Stanley Black & Decker
82 Taryn Drive, Epping, VIC 3076 Australia
Tel.1800 338 002 (Aust) or Tel. 0800 339 258 (NZ)
90591195
09/12
BMT300-XE/BMT300KA-XE
Содержание BMT300-XE
Страница 1: ...Australia New Zealand www blackanddecker com au BMT300KA XE BMT300 XE ...
Страница 2: ...2 A B C D E ...
Страница 3: ...3 G F ...
