How to Use
This product is for household use only.
BLENDER JAR ASSEMBLY
1. After unpacking the blender, before first use, wash all parts except the
unit base.
2. Put the gasket on top of the blade assembly.
3. Place the blade assembly into the jar base and turn
the jar base clockwise until tight
(A).
4.
Interlock System (220V models only):
Place the
assembled jar onto the unit base and turn toward
lock (
) until secured in place. You’ve engaged the
Interlock System if you lift the jar handle and the
entire blender lifts together as one unit.
USING YOUR BLENDER
Note:
Your unit has a motor overheating protection system that
automatically shuts off the motor.
1. Make sure the unit is oFF and plug the cord into a standard electrical
outlet.
2. Place the food into the jar and the lid on the jar before blending.
3. Make sure that the lid cap is in place. When crushing hard foods, keep
one hand on the lid.
4. Choose the speed that best suits your task for food or beverage
blending.
5. When finished blending, press the on/off
button.
6. For quick or delicate blending tasks use the Pulse (P)
button for a few seconds, then release
(B)
. Releasing
the Pulse (P) button automatically turns off the
blender.
7. To add ingredients while the blender is on, remove the
lid cap and drop ingredients through the lid opening.
8. To remove the jar, grasp the handle, twist toward the unlock (
) and
lift it from the unit base.
9. Remove the lid before pouring.
Size: 19.685" x 17.5"
A
B
Product may vary slightly from what is illustrated.
1. Lid cap
2. Lid
3. 42-oz. / 5-cup glass blending jar
4. Handle
5. Gasket
6. Blade assembly
7. Jar base
8. Unit base
9. Speed buttons
10. Pulse (P) and On/Off
button
POLARIZED PLUG (120V Models Only)
This appliance has a polarized plug (one blade is wider than the other).
To reduce the risk of electric shock, this plug is intended to fit into a
polarized outlet only one way. If the plug does not fit fully into the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician.
Do not attempt to modify the plug in any way.
TAMPER-RESISTANT SCREW
Warning: This appliance is equipped with a tamper-resistant screw to
prevent removal of the outer cover. To reduce the risk of fire or electric
shock, do not attempt to remove the outer cover. There are no user-
serviceable parts inside. Repair should be done only by authorized
service personnel.
ELECTRICAL CORD
The cord of this appliance was selected to reduce the possibility of
tangling in or tripping over a longer cord. If more length is needed,
use an extension cord rated no less than 15-amperes. (For 220 volts
rated products, use an extension cord rated no less than 6-amperes).
When using an extension cord, do not let it drape over the working
area or dangle where someone could accidentally trip over it. Handle
cord carefully for longer life; avoid jerking or straining it at outlet and
appliance connections.
Note:
If the power supply cord is damaged, it should be replaced by
qualified personnel or in Latin America by an authorized service center.
Please Read and Save this Use and Care Book.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should
always be followed, including the following:
❍
Read all instructions.
❍
To protect against risk of electrical shock, do not put blender
base, cord, or plug in water or other liquid.
❍
Close supervision is necessary when any appliance is used by or
near children.
❍
Unplug from outlet when not in use, before putting on or taking off
parts, and before cleaning.
❍
Avoid contacting moving parts.
❍
Do not operate any appliance with a damaged cord or plug or
after the appliance malfunctions or is dropped or damaged in
any manner. Return the appliance to the nearest authorized
service facility for examination, repair, or electrical or mechanical
adjustment. or, call the appropriate toll-free number listed on the
cover of this manual.
❍
The use of attachments, including canning jars, not recommended
or sold by the appliance manufacturer may cause fire, electric
shock, or injury.
❍
Do not use outdoors.
❍
Do not let the plug or cord hang over the edge of table or counter.
❍
Keep hands and utensils out of container while blending to reduce
the risk of severe injury to persons or damage to the blender. A
scraper may be used but must be used only when the blender is
not running.
❍
Blades are sharp. Handle carefully.
❍
To reduce the risk of injury, never place cutter assembly blades on
base without the jar properly attached.
❍
Always operate blender with cover in place.
❍
When blending hot liquids, remove center piece of two-piece cover.
❍
Do not use appliance for other than intended use.
SAVE THESE INSTRUCTIONS.
This product is for household use only.
BLENDING TIPS AND TECHNIQUES
• Cut food into small pieces ¾” (2 cm) before adding to the blender.
• When ingredients stick or spatter along the sides of the jar, stop the
blending action and remove the lid. Use a rubber spatula to push food
toward the blades. Replace the lid, then continue blending.
• Some of the tasks that cannot be performed efficiently with a blender
are: beating egg whites, whipping cream, mashing potatoes, mixing
dough, and extracting juices from fruits and vegetables.
• The following items should never be placed in the unit as they may
cause damage: dried spices and herbs (ground alone), bones, large
pieces of solidly frozen foods, tough foods such as turnips.
• Use the lid cap to measure ingredients up to 60 ml (2 oz.) when adding
ingredients like lemon juice, cream, or liqueurs.
Care and Cleaning
This product contains no user serviceable parts. Refer service to qualified
service personnel.
Important: To maintain performance, dry blades after cleaning.
CLEANING
1. Before cleaning, turn off and unplug the unit. Twist to unlock (
),
lift the jar off the unit base, and rinse. For easier cleanup, rinse parts
immediately after blending. Parts may be hand-washed.
2. Do not immerse the base in liquid. Wipe the unit base with a damp cloth
and dry thoroughly. Remove stubborn spots by rubbing with a damp
cloth and nonabrasive cleaner.
Note:
If liquids spill into the base, wipe with a damp cloth and dry
thoroughly. Do not use rough scouring pads or cleansers on parts or finish.
3. Removable parts can be washed by hand or in a dishwasher. Lid, lid cap,
and blade assembly should be placed in the top rack only. The jar is
bottom rack dishwasher-safe. Do not place jar or parts in boiling liquids.
Póliza de Garantía
(Válida sólo para México)
Duración
Applica Manufacturing, S. de R. L. de C.V. garantiza este producto por 2 años a
partir de la fecha original de compra.
¿Qué cubre esta garantía?
Esta Garantía cubre cualquier defecto que presenten las piezas, componentes y la
mano de obra contenidas en este producto.
Requisitos para hacer válida la garantía
Para reclamar su Garantía deberá presentar al Centro de Servicio Autorizado la
póliza sellada por el establecimiento en donde adquirió el producto. Si no la tiene,
podrá presentar el comprobante de compra original.
¿Donde hago válida la garantía?
Llame sin costo al teléfono 01 800 714 2503, para ubicar el Centro de Servicio
Autorizado más cercano a su domicilio en donde usted podrá encontrar partes,
componentes, consumibles y accesorios.
Procedimiento para hacer válida la garantía
Acuda al Centro de Servicio Autorizado con el producto con la póliza de Garantía
sellada o el comprobante de compra original, ahí se reemplazará cualquier pieza
o componente defectuoso sin cargo alguno para el usuario final. Esta Garantía
incluye los gastos de transportación que se deriven de su cumplimiento.
Excepciones
Esta Garantía no será válida cuando el producto:
A) Se hubiese utilizado en condiciones distintas a las normales.
B) No hubiese sido operado de acuerdo con el instructivo de uso que le acompaña.
C) Cuando el producto hubiese sido alterado o reparado por personas no
autorizadas por Applica Manufacturing, S. de R. L. de C.V.
Nota:
Usted podra encontrar partes, componentes, consumibles y accesorios
en los centros de servicios autorizados. Esta garantía incluyen los gastos de
transportación que se deriven de sus cumplimiento dentro de sus red de servicio.
Argentina
SERVICIo TECNICo CENTRAL
ATTENDANCE
Avda. Monroe N° 3351
Buenos Aires – Argentina
Fonos: 0810 – 999 - 8999
011 - 4545 - 4700
011 – 4545 – 5574
Chile
MASTER SERVICE SERVICENTER
Nueva Los Leones N° 0252
Providencia
Santiago – Chile
Fono Servicio: (562) – 232 77 22
Colombia
PLINARES
Avenida Quito # 88A-09
Bogotá, Colombia
Tel. sin costo 01 800
7001870
Costa Rica
Aplicaciones Electromecanicas, S.A.
Calle 26 Bis y Ave. 3
San Jose, Costa Rica
Tel.: (506) 257-5716 / 223-0136
Ecuador
Servicio Master de Ecuador
Av. 6 de Diciembre 9276 y los Alamos
Tel. (593) 2281-3882
El Salvador
Calle San Antonio Abad 2936
San Salvador, El Salvador
Tel. (503) 2284-8374
Guatemala
MacPartes SA
3ª Calle 414 Zona 9
Frente a Tecun
Tel. (502) 2331-5020 / 2332-2101
Honduras
ServiTotal
Contigua a Telecentro
Tegucigalpa, Honduras,
Tel. (504) 235-6271
México
Articulo 123 # 95 Local 109 y 112
Col. Centro, Cuauhtemoc,
México, D.F.
Tel. 01 800 714 2503
Nicaragua
ServiTotal
De semáforo de portezuelo
500 metros al sur.
Managua, Nicaragua,
Tel. (505) 248-7001
Panamá
Servicios Técnicos CAPRI
Tumbamuerto Boulevard
El Dorado Panamá
500 metros al sur.
Tel. 3020-480-800 sin costo
(507) 2360-236 / 159
Perú
Servicio Central Fast Service
Av. Angamos Este 2431
San Borja, Lima Perú
Tel. (511) 2251 388
Puerto Rico
Buckeye Service
Jesús P. Piñero #1013
Puerto Nuevo, SJ PR 00920
Tel.: (787) 782-6175
Republica Dominicana
Plaza Lama, S.A.
Av, Duarte #94
Santo Domingo,
República Dominicana
Tel.: (809) 687-9171
Venezuela
Inversiones BDR CA
Av. Casanova C.C.
City Market Nivel Plaza Local 153
Diagonal Hotel Melia,
Caracas.
Tel. (582) 324-0969
www.applicaservice.com
Por favor llame al número correspondiente que aparece en la lista a continuación
para solicitar que se haga efectiva la garantía y donde Ud. puede solicitar
servicio, reparaciones o partes en el país donde el producto fué comprado.
También puede consultarnos en el e-mail servicio@applicamail com.mx
es una marca registrada de The Black & Decker Corporation,
Towson, Maryland, E.U.
is a registered trademark of The Black & Decker Corporation,
Towson, Maryland, USA
