6
the desired speed, watch, and press Pulse/Stop when the desired consistency is
achieved. Holding the button for longer than 30 seconds will cause an error. Unit
must be unplugged to reset.
7. For blending tasks – or when blending thick mixtures – use the PULSE
button for several seconds, then release. Repeat until food has desired
consistency. Releasing pulse stops the blending and the unit returns to
standby.
8. Open the lid to add ingredients or add them through the shot glass opening.
Place shot glass back in lid opening after adding ingredients. Do not use the
pour spout to add ingredients
Important:
Do not remove the lid while the blender is running.
9. When finished press STOP to stop blending. Make sure blades have
completely stopped before attempting to remove the blending jar from the
base (refer to troubleshooting for any issues).
10. To remove the jar, grasp the handle and lift up.
11. Press On/Off to power off. Unit will auto shutoff after 60 seconds without use.
12. Always unplug the appliance when not in use.
TO SERVE
• Lift and remove the blending jar
• Pop open pour tab
• Pour and Enjoy!
Keep drinks colder longer with the insulated Chill Sleeve
• Insert the blending jar into the Chill Sleeve from the top
• Pull up on the Chill Sleeve until it fits securely around the jar. There are
notches for the handle and spout. The measurements on the side of the jar
should be visible through the opening.
• Now chill! Enjoy cool drinks for hours.
• To clean your Chill Sleeve, remove the blender from the sleeve and wash with
warm soapy water. Hang to dry.
TIPS FOR BEST RESULTS
• For a thicker blended drink, gradually add more ice and use less liquid ingredients.
• For a thinner blended drink, blend for longer and gradually add more liquid mixer
to the jar.
• Cut food and solid ingredients into pieces no larger than
¾
” for use in the blender.
• For best results when making blended cocktails, use ice that has been out of the
freezer between 10 and 15 minutes.
• Use
¾
cup of ice per serving, crushed .
• Do not fill blender more than 2/3 full with liquids.
• Layer ingredients starting with liquids on the bottom, followed by fruit and ending
with ice.
• When ingredients splatter onto the sides of the jar or the mixture is very thick,
turn the appliance off. Remove the lid and use a rubber spatula to scrape down
the sides of the jar and to redistribute the food, pushing food toward the blades.
Replace the lid and continue blending.
Содержание BL4001
Страница 21: ...21 ...