Black & Decker BHTC571, Инструкция по эксплуатации

Страница: 8 / 12

Page 8
SET UP & USE
OPERATING INSTRUCTIONS
Place the heater on a firm, level surface and plug the unit directly into a 120 V AC
electrical outlet.
NOTE:
Only operate heater in upright position.
1. Turn the thermostat knob clockwise (right) direction until it reaches the maximum
setting. The knob needs to be turned past LO until the power on light illuminates in
order to operate the Fan Only, “LO” Heat or “HI” Heat Settings
2. To use the Oscillation function select the Fan Only, “LO” Heat or “HI” Heat Settings
on the right side of the Fan/Heat Oscillation control knob. To use without the
oscillation function use the settings to the left of the Fan/Heat Oscillation control
knob.
3. Turn the heat control knob from the “O” (OFF Position) to the FAN ONLY ( ), LO
(Low 1000 watts) or
HI
(High 1500 watts) Heat settings.
The power indicator light turns on when either the, FAN, LOW or HIGH setting is
selected.
When the desired temperature/comfort level is reached, lower the thermostat knob
until the heater stops operating. The thermostat will automatically maintain the
desired temperature level by cycling the heater on and off.
NOTE: Turning the TEMPERATURE control knob clockwise will increase the
temperature setting.
Turn the fan/heat control knob to “0” to shut off the unit.
Thermostat
Fan/Heat oscillation
control knob
WHT0571 CONTROL PANEL SILKSCREEN
GREY 20
MIN