Page 9
SET UP & USE
Remote Control Battery Cover
PULL TAB
TO ACTIVATE BATTERY
PUSH
TO REPLACE BATTERY
Battery
NOTE:
Your remote control comes with a CR2025 type lithium battery already
installed. To operate your remote control, however, you must activate
the battery by removing the plastic tab that is sticking out of the battery
compartment door. Once the tab is removed, your remote control should
be functional.
When it is necessary to replace the battery, push the button next to the
battery cover to release the battery cover/door. Remove old battery and
replace with the new, making sure “+” side is facing up as shown in the
diagram. Once battery is installed, push battery cover/door closed and
remote control should once again be functional.
Remote Control Battery Cover
PULL
