Black & Decker BHDR401B, Инструкция по эксплуатации

Страница: 8 / 12

Page 8
OPERATION INSTRUCTIONS
1. Plug into a standard AC120V, 60Hz household outlet.
2. Turn function selector to the “ ” position and temperature control switch to low
setting to make the fan go on.
3. Turn the function selector to the “I” position to turn on the Fan and the Heater
to medium heat setting. Turn temperature control selector to set desired
temperature.
4. Turn the function selector to the “II” position to turn on the Fan and the Heater to
maximum heat. Turn temperature control selector to set desired temperature.
5. To shut off, turn the function selector to “O” position.
SET UP & USE
CARE & CLEANING
MAINTENANCE
1. Turn function selector switch to “O” position.
2. Unplug the unit and let it cool completely.
3. To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth.
You may use a mild detergent if necessary. After cleaning, dry the unit with a soft
cloth.
CAUTION
: DO NOT let liquid enter the heater.
4. DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes
to clean the heater. This may cause damage or deterioration to the surface of the
heater.
5. DO NOT immerse the heater in water.
6. Wait until the unit is completely dry before using again.
STORAGE
Store the heater in a cool, dry location when not in use. To prevent dust and dirt
build-up, use the original packaging to repack the unit.