background image

9

ENGLISH

(Original instructions)

hazardous. Only use accessories 

approved by BLACK+DECKER.

u

 

Never overreach while operating the 

lawn mower. Always be sure to keep 

proper footing and balance at all times 

while operating the lawn mower.

u

 

Mow across the face of slopes, never 

up and down. Exercise extreme 

caution when changing direction on 

slopes.

u

 

Watch for holes, ruts, bumps, rocks or 

other hidden objects. Uneven terrain 

could cause a slip and fall accident. 

Tall grass can hide obstacles.

u

 

Do not mow on wet grass or 

excessively steep slopes. Poor footing 

could cause a slip and fall accident.

u

 

Do not mow near drop-offs, ditches, or 

embankments.  

You could lose your footing or balance.

u

 

Always allow the mower to cool down 

before storing.

Pull the  plug from the socket and pull 

the battery pack from the machine. Make 

sure that all moving parts have come to a 

complete stop:

u

 

Whenever you leave the machine;

u

 

Before clearing a blockage;

u

 

Before checking, cleaning or working 

on the appliance.

Vibration

The declared vibration emission values 

stated in the technical data and the 

declaration of conformity have been 

measured in accordance with a standard 

test method provided by EN60335 and 

may be used for comparing one tool with 

another. The declared vibration emission 

value may also be used in a preliminary

assessment of exposure.

Warning!

 The vibration emission value 

during actual use of the power tool can 

differ from the declared value depending 

on the ways in which the tool is used. 

The vibration level may increase above 

the level stated. When assessing 

vibration exposure to determine safety 

measures required by 2002/44/EC to 

protect persons regularly using power 

tools in employment, an estimation of 

vibration exposure should consider, the 

actual conditions of use and the way the 

tool is used, including taking account of 

all parts of the operating cycle such as 

the times when the tool is switched off 

and when it is running idle in addition to 

the trigger time.

Do not operate the tool if the vibration 

registers as abnormal.

Safety of others

u

 

This appliance is not intended for use 

by persons (including children) with 

reduced physical, sensory or mental 

capabilities, or lack of experience 

and knowledge, unless they have 

been given supervision or instruction 

concerning use of the appliance by a 

person responsible for their safety.

u

 

Children must be supervised to 

ensure that they do not play with the 

appliance.

Содержание BEMW351

















Отзывы: