English
6
Fig. H
4.
lEVEl hEDgEs (Fig. i)
– To obtain exceptionally level
hedges, a piece of string can be stretched along the
length of the hedge as a guide.
Fig. I
5.
siDE-TRiMMing hEDgEs (Fig. J) –
Begin at the
bottom and sweep up.
Fig. J
6.
saw
BlADE™ (Fig. K)
(BEHTS125)
–
For branches too
large for the blade
1
to cut, use the
saw
BLADE™
8
.
Position the
saw
BLADE™
as close to the bottom of
the branch as possible. Place the
saw
BLADE™ shoe
9
against the branch. Turn the hedge trimmer on as
described above, allowing the tool to work at its own
pace until the branch is fully cut.
Fig. K
1
8
9
WARNING:
TO GUARD AGAINST INJURY,
OBSERVE THE FOLLOWING:
• READ INSTRUCTION MANUAL BEFORE USING,
SAVE INSTRUCTION MANUAL.
• CHECK THE HEDGE FOR FOREIGN OBJECTS SUCH
AS WIRE OR FENCES BEFORE EACH USE.
• KEEP HANDS ON HANDLES. DON’T OVERREACH.
• DO NOT USE UNDER WET CONDITIONS.
• DO NOT USE WITH DAMAGED EXTENSION CORD.
DANGER:
KEEP HANDS AWAY
FROM BLADES.
CAUTION:
BLADE COASTS AFTER
TURN OFF.
MAINTENANCE
WARNING:
Remove extension cord
from trimmer before servicing, cleaning or removing
material from the gardening appliance.
The cutting blades are made from Fig. L
high quality, hardened steel and
with normal usage, they will not
require resharpening. However, if
you accidentally hit a wire fence
(
Fig. L
)
, stones, glass or other hard
objects, you may put a nick in the
blade. There is no need to remove
this nick as long as it does not
interfere with the movement of
the blade. If it does interfere,
unplug the cord and use a fine toothed file or sharpening
stone to remove the nick. If you drop the trimmer, carefully
inspect it for damage. If the blade is bent, housing cracked,
or handles broken or if you see any other condition that may
affect the trimmer’s operation contact your local
BLACK+DECKER Service Center for repairs before putting it
back into use.
Fertilizers and other garden chemicals contain agents which
greatly accelerate the corrosion of metals. Do not store the
unit on or adjacent to fertilizers or chemicals.
