5
ENGLISH
(Original instructions)
After use
When not in use, the appliance should
be stored in a dry, well ventilated place
out of reach of children.
Children should not have access to
stored appliances.
When the appliance is stored or
transported in a vehicle it should be
placed in the boot or restrained to
prevent movement following sudden
changes in speed or direction.
Inspection and repairs
Before use, check the appliance
for damaged or defective parts.
Check for breakage of parts and any
other conditions that may affect its
operation.
Do not use the appliance if any part is
damaged or defective.
Have any damaged or defective parts
repaired or replaced by an authorised
repair agent.
Never attempt to remove or replace
any parts other than those speci
fi
ed in
this manual.
Additional safety instructions for
blowers
The intended use is described in this
manual. The use of any accessory
or attachment or performance of any
operation with this appliance other than
those recommended in this instruction
manual can present a risk of personal
injury and/or damage to property.
To protect your feet and legs while
operating the appliance, always wear
heavy duty footwear and long trousers.
Always switch off your product, allow
the fan to stop and remove the battery
when:
You leave your product unattended.
Clearing a blockage.
Checking, adjusting, cleaning or
working on your product.
If the appliance starts to vibrate
abnormally.
Do not place the inlet or outlet of
the vacuum near eyes or ears when
operating. Never blow debris in the
direction of bystanders.
Do not use in the rain or leave
outdoors while it is raining.
Do not cross gravel paths or roads
whilst your product is switched. Walk,
never run.
Do not place your unit down on gravel
while it is switched on.
Always be sure of your footing,
particularly on slopes.
Do not overreach and keep your
balance at all times.
Do not place any objects into the
openings. Never use if the openings
are blocked - keep free of hair, lint,
dust and anything that may reduce the
air
fl
ow.
Vibration
The declared vibration emission values
stated in the technical data and the
declaration of conformity have been
measured in accordance with a standard
test method provided by EN50636 and
may be used for comparing one tool with
Содержание BEBL185
