Black & Decker BDH1855SM, Инструкция по эксплуатации

Страница: 10 / 40

10
notIce:
The top cord hook rotates to easily release the cord ready for next use.
notIce:
With the handle tube in the upright position, the cord neatly wrapped
around the cord hooks your steam mop will stand on its own for storage. alternatively
there is a hanging bracket built into the hand grip which will allow your steam mop to be
hung from a suitable hook on the wall. always ensure that your wall hook is capable of
supporting the weight of the steam mop safely.
MaIntenance and cLeanInG
Your Black+Decker corded appliance has been designed to operate over a long
period of time with a minimum of maintenance. continuous satisfactory operation
depends upon proper appliance care and regular cleaning.
WarnInG:
Before performing any maintenance or cleaning on corded appliances
switch off and unplug the appliance.
• Clean your appliance using a soft damp cloth. Never let any liquid get inside the
appliance; never immerse any part of the appliance into a liquid. IMPortant: To
assure product SaFeTY and relIaBIlITY, repairs, maintenance and adjustment
should be performed by authorized service centers or other qualified service
organizations, always using identical replacement parts.
• For stubborn marks you can use a mild solution of soap and water to dampen your cloth.
care of the cLeanInG Pads
notIce:
Follow the cleaning instructions printed on the label of your cleaning pad.
Wash care instructions - Machine wash warm 140°F (60°c) - No bleach - No fabric
softener - air dry only - allow to dry fully before re-use.
accessorIes
recommended accessories for use with your appliance are available from your local
dealer or authorized service center. If you need assistance regarding accessories, please
call: 1-800-544-6986.
WarnInG:
The use of any accessory not recommended for use with this
appliance could be hazardous.
trouBLeshootInG
ProBLeM PossIBLe cause PossIBLe soLutIon
• Unit will not start. • Cord not plugged in. • Plug appliance into a working outlet.
• Main switch not on. • Turn main switch on.
• Floor head not correctly • Ensure floor head is correctly
fitted. attached.
• Handle not fitted • Fit Handle correctly
correctly - leD’s do not
light up.
• Circuit fuse is blown. • Replace circuit fuse. (If the
product repeatedly causes the
circuit fuse to blow, discontinue
use immediately and have it
serviced at a Black+Decker
service center or authorized
servicer.)
• Circuit breaker is tripped. • Reset circuit breaker. (If the
product repeatedly causes the
circuit breaker to trip,
discontinue use immediately
and have it serviced at a
Black+Decker service center or
authorized servicer.)
• Cord or switch is • Have cord or switch replaced
damaged. at a Black+Decker Service
center or authorized Servicer.
• Mop will not make steam. • No water in water tank. • Add water to the water tank.
• Mop leaves water on floor. • Cleaning pad is too wet. • Unplug unit from power outlet
and change the micro-fiber
cleaning pad.